Clone-A-Willy Kit

Reviews for:   Clone-A-Willy Kit

luv bugz on 4/23/2013

wowzers
We had alot of fun with this one!...great rainy day project, and it was so simple to do!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 4/18/2013

Cloned
Works just as advertised, going to surprise my wife with it
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 4/2/2013

perfect
My birthday gift to myself, so i can have my man anytime i want. (Even though the real thing is Always preferred) So much fun making it.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 3/23/2013

A Huge Waste and Dissapointment
I swear this kit is impossible. After following the directions and losing all the mold mix to the floor, I ordered two more bags to try again. Failed again the second time and finally got a mold the 3rd time. Thennn after pouring in the rubber, the clone had bits of the mold inside of it which created holes in the dildo and also the base of the dildo was just an amorphous blob of pieces hanging in every direction that had to be cut making it both ugly and unusable. Out a lot of money for no toy. Thanks
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 3/18/2013

Not what I had expected!
Did this three different times and every one of them came out badly. Followed the directions all three times, watched videos and even read reviews beforehand for some possible tips and ideas, but still no decent mold. Highly disappointed.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 3/13/2013

Not enough materials Penis to big
Ordered the Clone a Willy kit and couldnt wait till we got it, when it finally arrived we realized my penis was to big to fit in the tube not a big deal though just made our own tube then we finally got ready to do it and there wasnt enough material to do the mold mainly because it set fast and we were not prepared still no big deal bought some molding kits from the craft store finally made the mold now it was time to fill it with everything ready and mixed we began to fill it and it only filled up about a 1/3 of the way how upset I was put the vibrator in and ended up with a half length mold but she loves it. we now ordered 2 kits and are gonna try again my Penis is 9.5x7 so I think it would be fine for average sized men.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 3/7/2013

Fun
This is a fun kit it is easier with some help due to the time limit and the vibe is pretty weak I would suggest a stronger vibe.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 3/4/2013

great product
It really looks like the real thing. Its a little messy but it was fun and interesting. It is something fun to do with your significant other. The directions were easy to follow.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 2/28/2013

clone
Tried to do it on my own as a surprise for my wife, but it is very tough to do on your own. Having your significant there to do the mixing would make things much easier. The end result product was still pretty cool and a lot of fun.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 2/24/2013

weak vibrator
had to buy another vibrator to make it worth using.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 2/12/2013

Fun
What a fun thing to do gf loves it
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 1/28/2013

nice
It works but difficult staying hard as a rock while waiting for it to set
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 1/21/2013

Disappointed
Was ready & hard, but the mixture set fast, Like one minute. Plus it only comes with one mixture. But it was exciting, just the though of enjoying our willy after. Oh well maybe next time...
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 1/9/2013

Fun
Had fun making the mold but if your over 7" there is not enough liquid rubber
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 1/1/2013

Great idea
The wife and I prepared the mix per instructions and it set up faster than the instructions indicate. Probably was set up within 1 minute at the prescribes water temp. We will have to purchase another kit or try to find the mix somewhere. Next time will try cooler water temp.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/29/2012

A good time was had
We had a fun time making our clone.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/1/2012

mixture set too fast
followed the directions water exactly to 98 deg F. You have 2 minutes to mix it, pour it, get your self hard enough to stick into the pudding. For me at the 3 minute mark the mixture was already so hard i couldnt stick it in. I wasted 40 bucks. Have your girlfriend give you head or something while your standing there mixing the bowl of powder otherwise you have no chance.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

western nc on 11/4/2012

great produ
worked great looked just like mine
Was this comment helpful? Yes No
(1 person found this comment helpful, 1 did not)

Anonymous User on 11/2/2012

Fun
The wife and I had a blast!!! Just had to move fast. Good thing we work good under pressure
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 10/31/2012

HELP
HOW DO I TURN CAPSLOCK OFF I'M SCARED WHAT IS HAPPENING
Was this comment helpful? Yes No
(6 people found this comment helpful, 1 did not)

Anonymous User on 10/19/2012

ok
It was fun to do didn't turn out so good but I think we're gonna try again.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 9/24/2012

Cloning
Lots of fun a bit messy but worked fine ...!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 9/4/2012

An experience
Fun to clone a willy but ensure you follow the instructions to a T. Do not let the vibrator fall too forward or it will peek out of the top.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 8/21/2012

Need a helper
Do not try alone. After attempting to mix the batter and trying to stay hard, I found the mold set up quickly. It would be easier if a parner could either mix the batter while you had sex with them or if they provided oral stimulation to keep you hard.
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 8/16/2012

fun!!
this kit had a good bit of things you have to do in a lil bit of time but the process was fun my boyfriend and i enjoyed it. the only thing that sucks is you have to wait 24 hours before using it but other then that if you follow the directions right it turns out great!!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 8/1/2012

Awesome
My boyfriend and I did this together and it worked great, we followed the instructions without any difficulty. We had alot of fun doing it together. I love using the clone when he is away, it feels just like him.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 7/25/2012

Great Product
Anyone who says this product is a waste of money or time, is out of their mind. This kit was so easy to use, you would have to be an idiot not to get it right. Bought it for my wife, and she loves it. Our only issue with it would be is the tube needs to be a little wider and have a little more of the mold material.
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 7/6/2012

Pretty good
My fiancee and I enjoyed making this together. The mold was pretty accurate. However when the directions say to make it on floor that can be wiped clean, they mean it. It did make a little bit of a mess but nothing serious.
Was this comment helpful? Yes No
(9 people found this comment helpful, 1 did not)

Anonymous User on 5/16/2012

Too Fast
Instructions were easy to follow, but the 2 minute window in not acurate. It took about 30 seconds for the form to harden. Had to throw it all away. Suggeast using cooler water than instructed so form can last before it hardens.
Was this comment helpful? Yes No
(8 people found this comment helpful, 1 did not)

Anonymous User on 5/15/2012

Not one size fits all.
This is a great tool for the average tool, but for thick cocks, this falls short. Need to offer various sized kits as not all cocks are the same.
Was this comment helpful? Yes No
(6 people found this comment helpful, 4 did not)

Anonymous User on 5/1/2012

Waste of Money
It is a fun thing to do but the mold dries WAY to fast I mean by the time I put it in the tube it was hard and it wasnt but maybe 30 seconds to put it all in the tube. But on the plus side clean up was a breeze just would of been nice for it to work.
Was this comment helpful? Yes No
(4 people found this comment helpful, 0 did not)

Dan Dan the Pantyhose fettish man on 4/16/2012

Awsome
The best "Toy" we have ever bought. Looks just like me and my wife sais feels just like me but less chance ofgetting pregnant...lol
Was this comment helpful? Yes No
(6 people found this comment helpful, 1 did not)

Anonymous User on 3/29/2012

Love this!!!
My husband and I had a blast making this and a blast using it! Read the directions completely and get everything you need ready before you begin. My husband just fit into to tube (girth wise) even thought the tube is a good size so make sure you will fit before you mix your stuff. I no longer get in trouble for using while he is gone since it is His. Recommend this to the gals!
Was this comment helpful? Yes No
(8 people found this comment helpful, 0 did not)

kramit on 3/26/2012

fun need more filler
this was super fun with my gf make sure you have your gf or bf get ya nice and teased up so you dont lose your toughy, and a cock ring would help if you have ahard time keeping it the only downside is when u need to take your unit out you gotta soften up and that can be hard with a ring on. it is fun but i had to cut off about 3 inches off the tube and the stuff you use to fill the mold barely filled it it was about 1/4 inch short of filling even after inserting the vib in it, but just make sure you keep the vibe straight and buy an extra mold kit i didnt see one on this site.
Was this comment helpful? Yes No
(5 people found this comment helpful, 0 did not)

Anonymous User on 3/7/2012

not a full clone
this product was alright and it worked very well. the directions were easy to follow . i would recomend it to others to try my wife liked it. the only thing that i did not like about it there was not enough of the two part liquid to fill the whole mold so the clone was about 2 inches shorter than me.
Was this comment helpful? Yes No
(7 people found this comment helpful, 3 did not)

Anonymous User on 2/21/2012

The 4% Review
My boyfriend and I bought this and used it not to long ago. Apparently he is part of the "4%" that this product mentions. He is somewhat large...a lil over 8 inches in length and roughly 6 inch girth...so for anyone with these measurements (give or take...or larger) this kit will cause issues. The tube itself was long enough and did not cause problems. However, the instructions say to slowly rotate the tube if any of your pecker is touching the inside wall. Due to his girth this was somewhat hard to do. He could not get it twisted enough to where at least a bit of his pecker was touching the sides of the inner part of the tube directly. We had bought two kits (two different colors) and this occured with both of the kits. Secondly, due to his length/girth...there was not enough rubber to fill the entire mold. We did the first kit and used the 5 inch vibrator that came with the kit. When we put as much of the rubber that we could inside, there was at least 2-3 inches or more that was empty on the top. We inserted the vibrator and it did not push the rubber high enough to fill the rest of the space. It probably filled about an inch or so but there was still more room that was not filled. We went and looked back on the instructions and it mentioned that if you have a larger pecker, to use a 7 inch vibrator instead of the 5 inch standard that came with the kit. So, we went out later that night to a toy shop...we found a 7 inch vibrator (roughly the same type/thinness of the one in the kit). We used the second kit along with the 7 inch vibrator that we bought. It still did not fill the rest of the empty space. It did help but there was still some empty space that did not get filled. If you happen to have a larger pecker similar to that of my boyfriends, I strongly reccomend buying the extra rubber for the kit or finding a very thin but long vibrator to help push the rubber into those empty spaces. Aside from that the kit is great. Be fast, use a stop watch or a timer when you are mixing the powder for the mold...it helped greatly. Two people is a must. Read the instructions a few times...and if you go to the clone a willy website there is a "how-to" video that is very useful as well...I stronly reccomend watching/reading everything prior to the first use.
Was this comment helpful? Yes No
(23 people found this comment helpful, 6 did not)

Anonymous User on 2/15/2012

Piece of me left for use
We used this right before I left for deployment and it worked great. My wife felt like she still had a piece of me home.
Was this comment helpful? Yes No
(28 people found this comment helpful, 3 did not)

Anonymous User on 2/14/2012

Waste of Money
Bought this to try something fun with my fiance.. and what a waste of time and money. The solution dries way to fast. Even with cutting the end off and puring the solution in the tube it was dry before it could settle in and clogged in the top of the tube. Others may have liked it but i will not be buying this product ever again!
Was this comment helpful? Yes No
(1 person found this comment helpful, 3 did not)

Anonymous User on 2/13/2012

It's alright
Bought this kit after reading the reviews thought it would be fun to try. It turned out pretty good, we also cut the sealed end off and poured the mold in while I was laying down, much easier. I would have gave it five stars except the finished product seemed to be a little harder ( hard rubber) than I expected. I would recommend trying this, but make sure to read and then read the directions again
Was this comment helpful? Yes No
(4 people found this comment helpful, 0 did not)

Anonymous User on 1/12/2012

Two times the Clone
This is a great idea, recommended by friends. It did take us two orders to get the mold right, Had sex with the wife while she mixed the mold, fun times.
Was this comment helpful? Yes No
(4 people found this comment helpful, 0 did not)

Anonymous User on 1/11/2012

use tape
This was great because i wanted to buy a vibrating dildo but my boyfreind seemed offended by it. He felt like he wasnt enough for me. When i mentioned clone a willy he was excited and happy. I would recomend buying two, in case you mess up on the first one like we did. I would also recomend putting tape around the edges of the tube after you cut it, because he has to press it up against his skin and it can be sharp, thats how we messed up our first one. Now that i have cloned my boyfreinds cock i absolutly love it. its the perfect toy for someone in a relationship.
Was this comment helpful? Yes No
(8 people found this comment helpful, 1 did not)

Anonymous User on 12/12/2011

Great
works great and easy to make. be sure to read and re-read all of the instructions and follow them precicely. Me and my husband had a good time but would recomend buying two one just for getting the hang of what needs to be done.
Was this comment helpful? Yes No
(3 people found this comment helpful, 0 did not)

Anonymous User on 11/20/2011

Love it !!!
Please read all the instrutions FIRST ! And have a 2nd person to help and mix. This was easy to use and came out great we have had alot of fun with it also. Will def replace it when it goes !!
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 10/15/2011

Needs 2 do this
This is a very fun do with your lover, you will need two of you to do this right the first time. Read all the instructions before you start do them to a T, the only thing you might do different is cut open the closed end and put the tube on and have someone pure the mixture in so you have enought of the mold mixture to cover your whole penis. I inserted my in like the instructions an some spilled out an i almost didnt have enough to cover my whole penis. But after everything it looked just like mine wife loved it.
Was this comment helpful? Yes No
(15 people found this comment helpful, 2 did not)

serge on 10/4/2011

YOU NEED HELP!!!!
other men. between trying to keep it up and mixing the powder with the hot water its damn near impossible to stick your willy in the tube filled with the product after youve been mixing a bowl of it and while trying to concentrate ont he 2 minutes while keeping it up.. get help. you need a second person there..... gonna try and get a mold replacement for this. fail attempt
Was this comment helpful? Yes No
(13 people found this comment helpful, 2 did not)

Loves her toys on 9/23/2011

Not what I expected...
I bought this as something funny to do with hubby. It is fairly easy to make but the gel mold sets up to fast. The gel was still very lumpy so the mold didnt set up the way I thought it would. The only thing I thought was good about this is the vibe that it came with is very strong. Probably wouldnt buy again unless really cheap.. =(
Was this comment helpful? Yes No
(6 people found this comment helpful, 4 did not)

Anonymous User on 9/18/2011

Awesome Item!
Great item. The instructions were easy to follow and the whole process was problem free. I used a ring to help stay hard while the mold was forming and the mold forms quickly. My girlfriend loves the clone and it keeps her satisfied in our long distance relationship.
Was this comment helpful? Yes No
(29 people found this comment helpful, 1 did not)

Anonymous User on 6/29/2011

Plan ahead
Most important to shave ahead of time...or else have someone you trust with sissors afterward!! We used a plastic tablecloth on the floor to help with the mess, and make sure you have all your ingredients out, and read the instructions CAREFULLY ahead of time, not hard to do but must be quick to do well. Definately easier with someone to help. He kept himself hard while I did the mixing. A cock ring is a good idea. It takes 24 hours to be completely finished. If you have kids like us it is helpful to do it in stages: cut the plastic tube in advance, have to be erect to do this to know how long to cut the tube, and put on tape in one session and can finish in another session if needed. Also can be difficult to get an accurate length if you are fighting constantly to keep up the erection all the time. Cutting the sealed end makes good sense but we did not think of that. We got the water hotter than it said so we could work up the erection a little before dipping in the mold. Our biggest issue was he was touching the side of the tube. Good idea to check for that before it sets up. Because of this dildo is thin and the vibrator looks as if it may come out in the near future. If it does we will definately make another! Very life like...love it!!
Was this comment helpful? Yes No
(22 people found this comment helpful, 1 did not)

Anonymous User on 6/13/2011

Worked great
We did some modifying to the instructions. We cut the sealed end of the tube. Works best to have a helper to mix the batch and then dump it into the tube with the guy laying down (so you dump it in the end you cut off). It came out perfect!
Was this comment helpful? Yes No
(40 people found this comment helpful, 2 did not)

Anonymous User on 6/9/2011

Horrible!
So you have to mix this mold quickyly? also you have to get hard and stick it in and stay hard? Ok mine did not work so well...too occupied on the mold hard to get hard quick then could not stay interested... Anyways finished the product not as large as normal and well it is not smooth and very ridged! I pitty the wife if she had to use it! Horrible product...stay away....
Was this comment helpful? Yes No
(6 people found this comment helpful, 8 did not)

Anonymous User on 6/6/2011

Good Idea But...
Good Idea, but the directions have you use 98 degree water to make you molding paste. This simply cools too quickly, so I couldn't get a great mold. Hotter water would help, but much hotter is scalding. May try to re mold at a later date.
Was this comment helpful? Yes No
(5 people found this comment helpful, 1 did not)

Anonymous User on 5/20/2011

Didn't work.
Followed the instructions and it cooled too quickly so it was a waste of money.
Was this comment helpful? Yes No
(6 people found this comment helpful, 1 did not)

Anonymous User on 3/9/2011

read befor buying or using
Sounds like a great item but first the directions need help. Heat water above 98 degrees bc it cools toooo quick .second put your willy in the tube and cut the tub so the tub is open on both ends. After mixing insert your willy and thin have someone poor it in over your willy. Other then that it is great.
Was this comment helpful? Yes No
(20 people found this comment helpful, 4 did not)

Anonymous User on 2/16/2011

Great!
If you follow the instructions on the package this thing comes out perfect. My wife loves it! Thanks Adam and Eve!
Was this comment helpful? Yes No
(7 people found this comment helpful, 1 did not)

Anonymous User on 2/15/2011

fun to do with your partner
great concept but a little to time comsuming
Was this comment helpful? Yes No
(0 people found this comment helpful, 3 did not)

DG-MAN on 2/9/2011

GOOD TIMES
It was actually fun to put this project together with my girlfriend and even more fun to use afterwards. The anticipation on waiting for it to harden up (no pun intended) was killing her. Thanks A&E
Was this comment helpful? Yes No
(1 person found this comment helpful, 1 did not)

Anonymous User on 2/8/2011

Neat
This worked pretty well, a little more messy than I expected, but pretty good none the less. It was a hoot!!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 1/31/2011

Awsome Product
This product is great!!! The instructions make it so easy to put together. My husband and I had a lot of fun putting the clone-A-Willy together. It was a great Anniversary gift.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 1/18/2011

clone a willy kit
Awesome product. My fiance and I had a great time making a clone of my willy it turned out great with amazing detail. Deffently a must have and she loves it! :)
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 1/17/2011

a fun mess
well it sure was fun to make but we didnt quite make it time wise before the mold set up so were just gona have to retry
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Mrs. LoveSeat on 1/11/2011

2nd clone-a-willy
This is the second Clone-A-Willy me and my husband have perchased and it will probably be our last... though its a fun activity to do its pretty nerve racking to make sure you do everything in the amount of time you have because the toys pretty up there in price for you to mess it up.. We purchased a second one because we figured we would be more aware of what was going on but even that didnt settle the nerves about getting it done in time... plus my husband doesnt like the feeling of the mold so the clones where detailed and looked like him but waaaay smaller then he normaly is by a couple of inches..
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

A Very Satisfied Customer 6969 on 12/21/2010

Clone It
This is a great product, especially if you have your partner help you. We had a blast making it and then using it. Very lifelike and amazing.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/21/2010

clone it
we had fun
Was this comment helpful? Yes No
(0 people found this comment helpful, 1 did not)

LMG on 12/12/2010

AMAZING
This is a great idea! And had so much fun doing this together with my partner. It works quick so follow the directions carefully
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/6/2010

Great Novelty Factor
It was a little messy to do and overwhelming but it def. can be done by yourself. I got this as a surprise gift for my girlfriend and she was amazed at how close it was to the real deal. When they say it gets every detail they meant it!! Highly recommend.
Was this comment helpful? Yes No
(9 people found this comment helpful, 1 did not)

russ1ian on 11/22/2010

nice gift for those whose bfs travel :)
the only thing i dont like is that the guy literally has a brief period to stick his dick in cuz the mixture gets cementy really fast otherwise i love the kit! the bfs "clone" comes in very handy when hes away :)
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/18/2010

Definitely Trying again!
Trial number one didn't turn out perfect but not horrible either. Did it alone first try just to surprise her but I'm going to order another for us to try together.... hopefully with better results. I would totally recommend! A little pricey but loads of fun.
Was this comment helpful? Yes No
(3 people found this comment helpful, 0 did not)

Anonymous User on 10/25/2010

clone
its ok but u hev to b fast
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 10/12/2010

disapointed
The producet was not at all what I expected.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

gmaer on 10/1/2010

nervous but fun
i was nervous when i bough this but even if it doesnt work out perfectly its still a fun experience to do with your partner.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 10/1/2010

Sounds great but it ain't
product starting getting hard immediately and had trouble inserting, just a big waste of money ,my suggestion go buy one already made.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Glen and Diane on 9/21/2010

It's alive, it's alive
My wife and I had a lot of fun with the clone a willy. She loved it when it was finished. We will be ordering another one. First time was a tester. The second one will be better.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 8/30/2010

not bad
this worked pretty good it was true to size and color its a little stiff ,no pun intended and can be really messy i suggest old news papers in the area that you are going to be working in
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 8/27/2010

Perfect for deployments!
Love it! Me and my husband made one together. It looks just like him and I am really happy with the outcome. The rubber is a little too hard for my taste but other than that it is an amazing product.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 8/13/2010

worth a try
This product is def worth a try. Was fun to make with my wife. Its not rocket science, but ya better plan ahead for sure. My first one didnt turn out that great because I used too big of a mixing bowl and couldnt get all the gel out in a timely manner. Def takes 2 people to pull this one off. Also would recommend using a cock ring or something to keep it full erect. I had my wife working on me while I prepared everything, worked ok. But still 2mins is not much time. If somehow you mess up the molding process, clone a willy sells the mixing powder on its site so you dont have to buy a whole new kit. GL and have fun!!!!!!!
Was this comment helpful? Yes No
(23 people found this comment helpful, 0 did not)

Anonymous User on 7/30/2010

So much fun!
I was really nervous getting this because of the mixed reviews. It was SO EASY and so much fun to make. We didnt use a timer when doing it. I was disappointed that we had to wait 24 hours before unmolding it. And I think it weirded my boyfriend out because of how realistic it was, veins and all. I absolutely love it. I plan on ordering the glow in the dark kit next!
Was this comment helpful? Yes No
(11 people found this comment helpful, 2 did not)

Anonymous User on 7/23/2010

mix and make fast
the water HAS to be a little warmer than what it says and do it as fast as possible. and you should make it over an easy clean up area (tile, hardwood, etc) because its kinda messy. it worked ok, though.
Was this comment helpful? Yes No
(5 people found this comment helpful, 0 did not)

Anonymous User on 7/21/2010

Extremely Disappointed
Me & my fiance bought this as a way to deal with a deployment. We followed the directions exactly & used a timer. The mold turned to gel almost instantly. I do not recommend this product for anyone. It was a waste of $50!!! We were so severely disappointed.
Was this comment helpful? Yes No
(4 people found this comment helpful, 8 did not)

J & S on 7/19/2010

So Fun!
My boyfriend and I had so much fun with this kit! It was so easy to use, we followed the directions to a "t", and it turned out perfectly. This was so much fun for us to do together and it is so cool to have a replica of my guy to "play" with!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 7/18/2010

waste of money!!
i bought two because the reviews said its better to practice first. neither one turned out. its messy and the directions make it look easier than it is.im very very disappointed with the outcome for the price.
Was this comment helpful? Yes No
(1 person found this comment helpful, 1 did not)

BOlson on 7/13/2010

Super Fun
We loved this! It was fun to make and fun to play with! The only drawback is that it is not super smooth. I don’t know if we might have done something wrong. Even with WET Platinum lube it was a little rough. Either way it is a lot of fun for both my husband and myself. I suggest you get one and just have fun together!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 7/8/2010

impossiable
this is the second time my husband and I have tried the clone a willy. and for the money its a joke, the gel either dries before you can start the mold, or it takes to long to harden. The only reason it gets one star is because the vibe with it is great.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 7/2/2010

Clone a willy
Awesome, but you need two people or you could miss the timing and be stuck trying to stick your willy into a mold that has already set.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 6/27/2010

great
great product but alittle hard for my wifes liking
Was this comment helpful? Yes No
(0 people found this comment helpful, 1 did not)

Awesome on 6/19/2010

Looks great!
Lots of fun works awesome. Need 2 people for sure. The hardest part "no pun intended" is having that full erection. Looks so real.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 6/14/2010

Messy but Fun
Directions were great, but a helping hand is a must. Result was more realistic than we were expecting. Would recommend to others.
Was this comment helpful? Yes No
(8 people found this comment helpful, 1 did not)

steelhead on 6/8/2010

fun fun fun
me and wife had lots of fun doing it together just follow int.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 4/29/2010

Great Gift....LOL
I bought this item made the clone then gave the clone to my friend as a gift for him and his girl. Great if you think dudes wife is hot but you know you will never get with her. Thanks
Was this comment helpful? Yes No
(13 people found this comment helpful, 13 did not)

Hititlong on 4/28/2010

Fun for two
This product was a blast me and my girl had so much fun doing it.The step by step directions is easy to do.I can tell you this willy is one of the best thing i got.my girl loves being fucked with both my cocks now.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 4/22/2010

Let Down
had to order more powder b/c the stuff got too hard within 1 min not the 2 it said.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 4/18/2010

Didn't Work
Although we had fun trying. The batter was VERY lumpy so it did not show detail as shown in the pictures. Instead you get a wart looking dildo. I even used a wire whisk to mix it with
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 4/12/2010

fun4 all
we had an absolute blast with this. I bought it as a going away gift before deployment and she loves having it around. Not to mention the amount of fun it was to make. It was also a new experience for us.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 3/30/2010

Oh NO!
Little to say it was not enjoyable! Waste of money, it was unsucessful!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 3/29/2010

Little tricky
This was a little tricky to make but it is worth it in the end. The vibrator could use a little more power.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 3/28/2010

fred
It's ok, I had trouble the molding powder
Was this comment helpful? Yes No
(0 people found this comment helpful, 1 did not)

Anonymous User on 3/25/2010

still trying
first stage dried to fast but i am trying again.my wife wonts it when i am not home.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Seb on 12/23/2009

too realistic
Clone-A-willy is so good and realistic it is disturbing. Love the product and would buy for A&E any time.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/16/2009

would recomend
Me and the fiancé had fun making this, pretty easy to make as long as you read the directions, we had no complications. As the other reviews say this is very messy to make. Would reccomend
Was this comment helpful? Yes No
(15 people found this comment helpful, 1 did not)

Anonymous User on 8/17/2009

Clon A Willie Kit
Was fun to do. Being able to practicie it first would have made for a better outcome. It was still fun trying out.
Was this comment helpful? Yes No
(10 people found this comment helpful, 0 did not)

Anonymous User on 6/26/2009

wasnt bad
it was cool thing to try.. i think it comes out really well if dont right.. had problem with touching the side but thats my own mistake.. all of and my girl enjoys it
Was this comment helpful? Yes No
(3 people found this comment helpful, 1 did not)

Anonymous User on 6/22/2009

Clone a willy, I would not recommend this
After having tried this product twice, once by myself and once with her help.. both attempts failed miserably. We are relatively intelligent and can follow directions, I/we used a stopwatch for timing and for the second evena digital thermometer and still failure. so after $60.00 into this we are scrapping the idea. I would like to publish my name to add credibility to this review but privacy concerns outweigh the credibility issue..the only reason I did not rate it as terrible is it was amusing to attempt it and when she was helping it led to fun anyway. try it if you want to.. but I would not recommend this to anyone.
Was this comment helpful? Yes No
(19 people found this comment helpful, 0 did not)

Anonymous User on 6/4/2009

happy military wife
i highly suggest this product for every couple to try. after reading reveiws i was worried about buying it. my husband is on a 12 month tour to iraq,and learning from him doin a 15 month tour last year i wanted to try and make this kit, he was recently home for R&R and we had not 1 problem with the kit,He an i are very satisfide on how wel it turned out.Whoever idea it was to sell this kit is my hero for the next 8 months :D,
Was this comment helpful? Yes No
(29 people found this comment helpful, 2 did not)

Anonymous User on 5/7/2009

Must have for long distance relationships!!!
I have bought two of these kits. My original purchase was for my husband and I. He was leaving for Army Airborne School for several months. We had no problem making his clone-although I recommend at least two people for the process. While he was working on staying hard, I was getting the temperature just right. It looks just like my husband. I loved it sooo much, I recently purchased the kit for a friend for her bachelorette party. A month after their wedding, he will be spending a year in Afghanistan. This is the best product next to the real thing!!
Was this comment helpful? Yes No
(13 people found this comment helpful, 0 did not)

Anonymous User on 5/7/2009

2 person job
I tried to do this myself to surprise my wifewhen it was done and I ruined it. I poured the white stuff into the tube and jerked a little to ensure I was rock hard. Went to put it in and it was solid.
Was this comment helpful? Yes No
(4 people found this comment helpful, 4 did not)

Anonymous User on 4/29/2009

HORRIBLE!!!!!!
My wife and I tried to create one of these and the gel set within 20-30 seconds. I stayed hard for ample time to create a mold but it was impossible to TURN it like the directions say to do if you hit the sides unless I twist my little buddy off.
Was this comment helpful? Yes No
(5 people found this comment helpful, 1 did not)

Anonymous User on 4/2/2009

Too Hard Too short
In theroy this product works very well if you are shorter, straighter, no completely straight, and do not have a big girth. but if you do fit this criteria the "willy" is very hard not soft or flexable although its pretty to look at.
Was this comment helpful? Yes No
(5 people found this comment helpful, 1 did not)

Anonymous User on 3/21/2009

follow
follow the directions closely when it says 98 degrees it means 98 degrees or it will set up within 30 sec
Was this comment helpful? Yes No
(10 people found this comment helpful, 0 did not)

Rafael on 3/13/2009

looks little deformed
I did it by my self if you follow the instructions to the letter its kind of easy its a bit messy recomend not fill tube all the way leave room for some of rhe space youre member is going to take it was really hard to take my penis out because my hard on would not go away when i managed to get out the head of the mold got deformed beacause of the sucktion it created when i pulled out
Was this comment helpful? Yes No
(2 people found this comment helpful, 1 did not)

Anonymous User on 3/11/2009

2ND CHANCE...
my hubby and i had alot of fun doing this. Few suggestions..if ur man is on the rather larger side..8+ dont put all the mold into the tub..and if it does touch the sides dont twist it. I wish we had a second chance at it bc it would def be perfected!.. its a lil harder then an avg dildo, but managable..it was exciting to see if it really worked...and it does..it is messy but very easy to clean..oh 1 more suggestion...guys...SHAVE b4 u do it..the mold is a lil harder to get off u..then the floor!!!
Was this comment helpful? Yes No
(5 people found this comment helpful, 0 did not)

Anonymous User on 3/2/2009

Very realistic
Follow the directions, and you will have yourself an identical clone, you can even see the veins and pores! Its amazing, I didnt expect it to be THIS realistic. Two problems, if the vibrator doesnt seal completely, it is NOISEY! The other problem is that there are 2 settings, OFF and JACKHAMMER ROUGH.
Was this comment helpful? Yes No
(5 people found this comment helpful, 1 did not)

Anonymous User on 2/27/2009

Follow instructions exactly
When it states 2 mn. thats what it means. Need to use a different kind of rubber. This product makes a great rep. but is stiff and does not feel real.
Was this comment helpful? Yes No
(4 people found this comment helpful, 0 did not)

Anonymous User on 1/31/2009

never again
hardens to fast
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Big Dipper! on 1/25/2009

Large Size kit required
We imagine that this would work well if it came in a larger size. My BF could not get his stick in the tube when hard. Our recommendation is to offer a large size kit to accomodate the larger males.
Was this comment helpful? Yes No
(2 people found this comment helpful, 2 did not)

Anonymous User on 1/20/2009

works well but...
Kit worked just as it said it would but I must fall under that 4 percent of men that need more rubber, because at 8 inches it fell about 3/4" short of filling up the mold even with the vibe inserted. Other than that worked well, use with partner or it will not work and follow directions exactly how they go.
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 1/20/2009

could be improved
The concept behind this item is really good but the difficulty makes it a bust. We mixed the mold and my boyfriend stuck his hard on in there. When we were all done and got the willy out it had a lot of rouch spots from where the mold didnt mix completely. I suggest having your partner mix the mold like pancake batter while you work on keeping hard.
Was this comment helpful? Yes No
(5 people found this comment helpful, 0 did not)

suzi on 1/14/2009

this is fun
i had alot of fun making this with my fiance . only thing is its a little hard, would be better with a softer rubber available.
Was this comment helpful? Yes No
(4 people found this comment helpful, 1 did not)

Anonymous User on 1/14/2009

fun and happy
it was fun and enjoyed doing it for my wife really need to watch the time cause it gels up fast . that would be the only thing i would change with this product otherwise worth it
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 1/6/2009

Looks just like the real thing
I first have to say that this product did what it said it does to a T. With that said the product images show the "willy" to have a cyber skin like appearance when in reality it is a hard skin colored plastic. I wanted something "flexible" and this has no play other than that great.
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 12/17/2008

Not enough filler.
While it was fun to do and we did follow the instructions precisely, there just wasn't enough filler and it turned out about two inches shorter than my husband. Although it was too short, the rest of it turned out perfectly, the right girth and it was an exact replica of what he looks like.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 12/13/2008

TADA! Love it!
This was easy to do and a lot of fun in the process. No mess here. Make sure when you cut the mold to length that you cut it even..otherwise you may have thin areas. A whisk helps get all the air bubbles out of the mixture. We love it! We had no problems at all. Exact replica indeed!!!
Was this comment helpful? Yes No
(4 people found this comment helpful, 0 did not)

Anonymous User on 12/4/2008

It takes two baby
I bought this and my husband tried to do it by himself. It was disastrous and a waste! He was so disappointd that I bought him a second one and this time he waited until I could help him. It is a little tricky but if you follow the directions you will get good results!
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 12/3/2008

AWESOME
My Girlfriend LOVED this! It Turned out great! I would recommend this product for sure!!!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/1/2008

Best Product Ever!!!
This kit was really easy to use, even by myself! Trust me, just follow the directions take your time, and it will work out. Also, just make sure you have a special person there to keep you hard because the molding part does require three hands. Following directions and getting aroused at the same time was a task, and probably the hardest part. Once you pull the finished product out you will be shocked! I will definitely buy another, but this time will make it with the gf because it is so fun!!!
Was this comment helpful? Yes No
(3 people found this comment helpful, 0 did not)

r&t texas on 11/16/2008

great fun
we had a blast with this cloning kit---- its the gift that literally keeps giving--- wish it had more of the liquid rubber ----this time we made it w/ vibrator next time we are ging to skip the vibes ----definately recommend ---my wife has always told me that she was going to have my "willie" stuffed if anything ever happened to me ----now i dont have to worry about that i feel "immortal"
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Madski on 11/11/2008

Hard to do
I found this very hard to do even with help. The instructions say to cut the tube to your size, which we did, then we made-up the mix. Ehen we poured it into the tube there was not enough to fill the tube to the top. So we recut the tube, all of this extra time cause the mix to get hard and we could not make the mold.
Was this comment helpful? Yes No
(1 person found this comment helpful, 1 did not)

Anonymous User on 11/10/2008

Thinking A-Head ;-)
We recently discovered my man has prostate cancer, erections may or may not continue after surgery, so just in case, I ordered this kit to 'immortalize his penis' before surgery. Long story short, "Junior" was created, and looks exactly like the real thing! I would suggest this to anyone, especially if facing the same situation. Clone the willy together only after the diretions have been read and understood by both, time is an issue, be prepared, and be sure to lay down a paper bag or something dissposable, the mixture does drip. The vibrator is only one-stroke (1 AA battery) but is still impressive. Even under the pressure of impending surgery, we had fun doing it and we're going to make another. 5 star from us both.
Was this comment helpful? Yes No
(10 people found this comment helpful, 0 did not)

Anonymous User on 11/6/2008

Smells and feels toxic
We tried this and even did a vagina mold with some of the extra. We got the mold done great both times and got the dildo finished easy both times. Yet after days, then weeks, then months it was still sticky and smelled toxic and the material looked nothing like on the site. So we tried it again thinking maybe our batch was old when sent to us. Nope it was the same the second time. No way was that going into our bodies. And it couldn't use a condom because of how sticky it was. Gross! We were soooooo dissapointed because it was really easy to do and lots of fun, but ended up unusable. I finally just stuck it to my mirror for fun and could use it to stick notes to. That's how sticky it was!
Was this comment helpful? Yes No
(0 people found this comment helpful, 2 did not)

lotfru on 11/6/2008

Great!
My bf works a lot so he got me this for my birthday. We messed it up with the timing but second time we got it right and it's a wonderful toy to use alone or together, it's a bit hard but with the right lube is AWESOME! Yup, follow the instructions!!!!!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 11/4/2008

messy
me and my husband got one. You really have to have patience and read the directions several times. make sure you have everything out and waiting prior to you getting hard. YOu have to make sure the temperature is the exact degree. make sure you go somewhere that has hardwood floors no carpet or rugs (very messy). I have to say it took 3 tries for us, because it was our fault. however the 3rd one turned out perfect, I would buy another one lf these if i hadnt already brought the first two that we screwed up. I would recommend everyone having one of these, It looks almost identical to his penis.
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 11/4/2008

So much fun
This was so much fun to make and use. I live six hours away from my boyfriend so I ordered this kit and we made it for when he came up for the weekend. It was so much fun to make and really helped us get closer. Now that he is gone I have a part of him to play with.
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Jason D. on 10/28/2008

Only designed for a straight penis
If you have any arc, bow, tweak, torque, bend, or curved penis, then this will not work for you. The tube is designed for a penis that is straight like a ruler. I have tried 3 times which required me to buy extra plaster. Every time I tried to keep my penis from rubbing against the side of the tube, the plaster would pour out the bottom. It does not work; at least not for me. Waste of time, money, and lots to clean up.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 10/24/2008

clone me
This was by far the best thing we have bought so far!! Not only was if fun to make it is also fun to use. My wife loves to use it when she gives me head or when I go down on her or when I'm not there or..... Well you get the picture. She says it like cheating with out the guilt.The only thing I will say FOLLOW THE INSTRUCTIONS!!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 10/22/2008

Amazing!!!!
I am addicted to this product! I have purchased several of these kits! The end product is AMAZINGLY realistic. I have used it on myself as well as some of my friends!!! LOL!! It is a lot of fun.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 10/12/2008

0-1 Hope it gets better!
First of all, I recomend not trying this alone! If there is any way of finding someone to help it would be well worth it! I, trying to surprise my wife, tried it alone. What a mistake. Although it can be done, it's very difficult! Very difficult! Unless your unbelieveably talented and can stay hard using will-power lol. So if you do it as the directions say i suggest using a little cooler water so you have a little bit more time because when they say 2 minutes they really mean 1 minute and 59 seconds lol Hopefully i can get the next batch to work out better!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 10/9/2008

Wow
I got this and made it solo. My wife was always looking for the kit so I got it as a surprise. I used a ring and even with that the level of detail was amazing, it is interesting to see what you actually look like. It was not messy, I did create a mess while pouring in the tube, but once I finished I was able to scrape off the hardened mold from the counter and you never knew. From start to cleanup took about 45 minutes, not counting the 24 hour wait for everything to dry.
Was this comment helpful? Yes No
(4 people found this comment helpful, 1 did not)

faygo19 on 9/25/2008

Crazy Real
Well we didn't think it would take tape and a few bowls to do but once you read the directions and realize its not that hard to mix you can make something that looks like your penis. Fun to do because you have to be "hard" so she gets to have hands on with that. Only Down sides is it takes 24hrs to dry so after you do all the work you have to wait. Also YES YOU NEED TAPE DON'T ACT TUFF YOU WONT BE BY THE END! Oh and make sure you get light skin or dark yes my gf is with her first dark guy while I am out of town.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 9/25/2008

awesome willy
I thought the clone was a great idea. I was very impressed when we were done, but we did make a huge mess while doing it I wish we would have cut the other end off and him lay down I was jipped a few inches but its still him and still awesome!!!! I just wish it was slick like a dildo its really not slick I dont know how to explain it. I love having an extra him around. This product is awesome and I would tell people to try this out just dont feel rushed and actually have them lay down while you pour in the mix you will know when its jelled for sure. I believe we will buy another one and try this way. Then I will have two for the ultimate time of my life!
Was this comment helpful? Yes No
(4 people found this comment helpful, 0 did not)

JAS & SAS on 9/18/2008

Great Fun!!
We both read the instructions and a lot of the reviews. Might have been in trouble had we not read other reviews! This was a lot of fun for both of us and we laughed and had a great time doing this. My boyfriend was here for only a week. I'll still miss him, but now I have a part of him forever! I would recommend to first timers to stand in the shower. The mess will be SO much easier to clean up. We are doing this again when he comes back to town! We highly recommend!!!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 9/18/2008

great for deployments
My husband deployed and this was great to keep me happy while he was gone. Try to follow the directions as much as possible.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

XTacey on 9/18/2008

Clone a Willy - Only if You're Huge!
I don't know if it was just our bad luck, but the product did not turn out at all. Although he is on the smaller side of average we figured this product would account for that. We were wrong. Even with the tube cut to size the moulding product did not come up far enough to capture his full length. Also, for reasons unknown to us the final product did not settle well at the tip making the product hazardous to clean as well as somewhat irritating for me. We are not happy. I'm torn between trying again and hoping for better results, or just giving up hope of having something for the weeks when he's gone. Product takes 26 hours to be fully ready for use, and is relatively easy to do if you're set up prior to starting. Have everything laid out.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 9/14/2008

It works
Like others have said it works great and it looks real. Things to keep in mind, when they say insert within the first 1 1/2 min they mean it. The first time I tried the molding hrdened before I inserted. I did order more molding mix from the web site listed on the instructions. The second attempt was much better but make sure that you make sure you mke the tube a little longer than your length. If you dont your final product will have the flat spot the same goes for if you are touching the sides of the tube. Would highly recommend if you are looking.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 9/13/2008

Great, but difficult!
This was very life like and very detailed, but it was very messy and difficult to use. Definetely, an item to use with 2 people as trying to get it done with 1 is not going to get the best results.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Jaw on 9/7/2008

I liked this
I got this to see if it works and it dose by girlfriend loves this and it was funn to make.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 9/6/2008

Looks cool.
We havent tried this yet but it seems like it's gonna be a lot of fun.
Was this comment helpful? Yes No
(0 people found this comment helpful, 4 did not)

jesicka on 9/4/2008

awful!
We purchased 2 of these the first one was a disaster and looks mutant, and the second one was just as bad, we read directions and followed them but didnt have any luck with them.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 9/3/2008

SUCKS!!!!!!!!!!!!!!!!!!
Work very fast and don't expect to have a good time very hard to make hardens too fast waste of money didn't work at all!!!!!! I would never try this again
Was this comment helpful? Yes No
(0 people found this comment helpful, 1 did not)

Anonymous User on 8/28/2008

It's fun!!!
This product is fun but it was very messy. Also it tells you to rush so we did it really fast and it kinda messed it up. The finished product is really cool though and it was so much fun making it with my husband!!
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

spunkyinkers on 8/27/2008

Just plain fun
Thought it would make for a interesting night...it did! We were laughing the whole time. The only down fall to this toy is time. The molding powder has to be mixed and poured into the tube all under 2mins. Starts to hardern within seconds it seems and if you don't get him in there just right its not going to look just like the real thing. My advice is do everything in the kitchen or bathroom.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 8/27/2008

use a partner
Made the mistake of making this for my girlfriend with her help. Followed the instructions but as everyone else has said you have to work fast or you'll ruin the kit. If you make this buy yourself you'll be checking water temperatures and mixing the mold solution for a minute until you can set it in. I lost about an inch and a half so it is not an exact replica. Still works great and my girlfriend loves it and uses it constantly. Fun for some kinky 3way sex when a third party is not involved. I'm going to dp and dv her when she's up to it.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 8/26/2008

Nice idea, Sets up too quick.
Well, boyfriend was deploying, thought it was a cute idea. The gel set up in about 6 seconds after I started mixing... Obviously a lil quick to get the job done. Not worth 35 bucks to try again. Oh well. Hope you have better luck!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

luving couple on 8/25/2008

Two Team Job
It is pretty easy as long as you have everything ready set out so you can grab it quick,play with him and let him mix and pour. And you are good to go. We had alot of fun.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 8/22/2008

definitely worth a try!
we had alot of fun attempting this! our mistake is we mixed the molding paste and got ready to him in it, but we got carried away and it harden up on us! when they say 2 minutes. they mean it! dont wait till the last minute! we've simply ordered more paste off the website so we can try again. its alot of fun, we had a good laugh
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

lilith13x on 8/20/2008

C-ring suggested
The instructions & video make it seem super-easy and quick but it's not. It takes a lot of prep, it makes a mess, you have to wait 24 hrs. before it's actually complete, the clone reeks of the liquid rubber scent, and it definitely does NOT come out looking as smooth or flesh colored as shown. (We ordered the light skin tone but the end result was an amber color.) The mold did capture a lot of details but we think a c0ck ring would provide the best results. So we're buying one of those & another clone kit & hoping the 2nd time is a charm.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Jessica on 8/20/2008

Not how the review in the catalog says!!
We bought this kit, thinking it was going to be awesome...Well Not only is this the messyiest kit i have ever seen, but that is not what gets me... The Dildo, turned out awful! It is all yucky all the way around it from the mold, so its rough, and there is NO way I will put that thing in me!! It was completely a waste of my money, which upsets me for the price i paid.
Was this comment helpful? Yes No
(1 person found this comment helpful, 1 did not)

Anonymous User on 8/18/2008

disappointed
this thing didnt do anything except make a mess. i noticed i was touching the wall of the tube and tried to rotate like the instructions say and the stuff started spilling out when i got it to stop leaking there was not enough to even make a mold. im not spending more money to have the same thing happen again. i have been very pleased with everything iv ordered from A&E but this one definatly will not be recomended to friends
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 8/13/2008

NOT As Easy As It Seems
This would be an AWESOME product if it was half as easy to make as it seems. My boyfriend and I have tried it twice and still haven't gotten it right! Follow the directions very, very carefully and be warned that you might need to purchase more molding powder or another kit altogether. Our first kit had a defective thermometer, but Adam & Eve shipped us a new one very quickly - thanks!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

tiddlediddlebug on 8/8/2008

HIGHLY recommend!
Just read the instructions about 20 times prior to starting, have EVERYTHING ready. Do it over a hard floor. Use a ring or band to make sure he stays as hard as possible. You've got to move fast. Lots of fun and great to have a replica!
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

4 STARS,WOULD BE FIVE IF THEY CAN IMPROVE TIMING! on 8/8/2008

woow ooo woow!
I WAS A LITTLE UNSURE,BUT,MY MAN'S IN THE MILITARY,SOOOO,I DECIDED I WANTED THIS FOR WHEN MY HUSBAND GOES AWAY. THE FIRST KIT,HE ALMOST BROKE HIS WILLY! IT HARDERED TOO FAST! BUT WE HAD FUN!SECOND TRY WAS BETTER,ONLY THERE IS A THREE INCH SHORTAGE FROM THE VIBRATER. DON'T CARE,IT;S 'HIS' PENIS! EXACTLY!!!!!!LOVE IT!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 8/7/2008

What A Great Idea!!!!
I had seen the ones for sale of porn stars but to actully have my husbands penis, every inch of it just like the real hard thing, but mine anytime I want it, this is the coolest invention in the world!!!!!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 8/6/2008

I AGREE
I agree with many reviews. Way too rushed even with two people. Very messy, i had to lay down cardboard on the floor.Missing about three inches. I'm going to buy another kit and try again.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

LucyLou on 8/3/2008

awesome
I got this kit so my boyfriend could be with me while he is out of town..It is so amzingly real..now I have him with me all the time,,the vibe is great too..and when he is here with me he loves to use it in my rear while he is in my front..I LOVE IT
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 7/31/2008

need assistance
great if you have someone helping you. unfortunatly i went limp before it sent in and only got half of it. otherwise its a great product
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 7/31/2008

ROTFLMFAO!!!
Ha Ha Ha Ha This is so cool! I bought 2 just because I knew we would mess the first one up. He didnt want to do it at first but ended up HAVING FUN! I wouldnt say we messed it up its just he didnt know what to expect and we were moving kinda fast and he was losing concetration (which was funny) and I ended up with a almost "soft version" (which I aint complaining bc he is pretty big that way) but now that he knows whats going on... the next version will be the real thang if you know what I mean. Its so fun to do we laughed almost the entire time!! get it people get it.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 7/29/2008

My Girlfriend Loves It!
She helped me make it and we had a lot of fun - it definitely helped to have her assistance. The result was very realistic. One bit of caution: if your willy has a slight bend, then be sure you center the vibrator when you insert it. We didn't realize this and the vibrator is very close to the surface on one side - there's a very thin layer of rubber at that spot.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 7/23/2008

OH MY GOSH..its my bf penis
This product was a little nerve racking but I love it. My boyfriend is leaving soon for 2 week vacation and hey, I need well you know something.. and what better way then to clone my boyfriends penis. Yes, it is messy, but it works very fast, and WORKS amazing and yes.. it works wink wink
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 7/22/2008

very cool
We loved it. The mold gets hard very fast though. other than that, its great. we are going to buy another one. It was fun.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 7/20/2008

buy 2!
great product but get two. our first endeavor was a disaster (garbage, but the second one turned out better (third would be perfect lol). and measure measure measure! my "willy" has a curve, so it was a little trickier.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 7/16/2008

Hard as a Rock
FOLLOW THE INSTRUCTIONS TO A T!!! mold hardens quickly, and makes a huge mess!! it does make a clone...which is really cool...overall i would buy the product again...it was really fun to make. the boyfriend was a little skeptical about it, but in the end was happy to see his clone...lol
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 7/16/2008

Looks GREAT
My wife and I used this product this other night and it worked like a charm. We have not used it yet, but i know it is going to work. It is an exact replica of my penis. I do suggest that you do this over hard floors or something easy to clean up. DO NOT do it over carpet. It looks AWESOME!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 7/16/2008

Pleasure
This is the second time my husband and I have ordered this product....It was perfect the first time and when you married to someone who goes TDY and you cant go..... it is a way of keeping part of him at home while he is gone...the only thing is there needs to be a way to order just the vibrator that comes with it in case someone just needs to order the molding stuff.....
Was this comment helpful? Yes No
(1 person found this comment helpful, 1 did not)

Anonymous User on 7/14/2008

wont buy again
tooo hard to use had to buy new molding kit due to molded before we were ready followed directions but molded to quickly
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 7/12/2008

Wow. Looks almost too real.
I put out some newspaper and did this as directed. Took about 30 minutes (half-baked) to read the instructions, but decided as it was a surprise, to make it myself. The next day after fully hardening, was a perfect replica (had to cut off a bit for the battery compartment) of... ME. Did it myself, a bit messy, but overall very nice product.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Brandi_Alize on 7/10/2008

Not happy at all
My fiance and I were super excited on getting this product since it was a two person job. We made sure to get his penis into the tube in plenty of time since you only have about two minutes. Well he put his penis in the tube and the stuff came flying out of it all over the kitchen floor. Very messy! We waited the correct amount of time for each step. After everything was done we got off the excess and realized that for some reason the "cast" was only of half his penis. And to top everything off it smelled so bad- so bad that we tossed it in the garbage and the next day when we tossed something away we could still smell it. Yuck!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 7/10/2008

mini me
I bought the Clone-A-Willy as a surprise for my girl that lives out of town. The the quality of the finished product was good. I tried to make it by myself, and there is too much going on with the measuring and mixing to keep a full hard. Definitely need to have two people. We are going to try again together.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 7/10/2008

Buy Two!!!
My boyfriend and I bought this kit and had alot of fun making the thing, but... I should have bought two. We found that the first attempt makes a better learning experience than a final product. I think that the kit should include enough materials for two times because i imagine that it is nearly impossible to perfect this practice on the first go around. Our second kit is on its way and we are excited because we know what needs to be adjusted or done differently this time. Was still tons of fun, though.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 7/7/2008

So Realistic
My girlfriend and I recently used this kit and were not sure how it would turn out. We were pleasantly surprised to find out that the kit made an EXACT replica. It will replace some toys we have and bring much enjoyment to our sex lives .
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 7/5/2008

Great Fun!
Lots of fun to make and looks identical.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

ag on 7/2/2008

pancake mix and penis don't mix
hey guys and girls, I got this for my wife since I am away at work half the week. I followed all the instructions and was erect while putting my penis into the mix that looked and felt like pancake mix. I dont know if it was just me or what, but the pancake feel did not help keeping it erect. Atleast I know when she sees me she will be getting a lot bigger than the toy. But other than the keeping erect in pancake mix, the mold turned out ok for usage. She loves the replica.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 6/30/2008

Clone a friend
My wife and I have a threesome playmeat who can't always be here with us. We cloned his Willy and now have our threesomes anytime. Great product! Interesting to use. She had to work at keeping his Willy hard. What fun to watch!
Was this comment helpful? Yes No
(0 people found this comment helpful, 1 did not)

Anonymous User on 6/30/2008

Good times
My girlfriend and I had a blast making this thing. Messy but fun with a good end product.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 6/27/2008

Cheap and difficult
I read all the reviews before purchasing this item so I did expect that the molding process had a strict time to it. That was not the problem. My dissapointment was with the final product. I has a strong chemical odor that I can not wash off and the vibrator that came with it is so cheap. There is only one speed - super fast. Plus it turns on and off when ever it likes. I was thinking about trying it again with purchasing my own seperate vibrator but the smell has made me change my mind.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 6/20/2008

too soon!
i bought this kit to make one of my husband before he left for a deploytment. most of the reviews and the instructions stressed how important it was to get the penis in the tube SOON SOON SOON. well we got his penis in the tube at about 2:10 (its supposed to be in before 2) and it was so gooey and wet and sloppy that it run back out all over the floor and it was hard for my husband to keep it in. because of that, the mold wasnt very good bc so little of it was left in. the actual dildo wasnt too bad, but im not going to use it bc of the rough edges and the fact that its terribly deformed due to the bad mold! had fun, but made a mess on my kitchen floor and didnt get the result i wanted. would probably try again.
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 6/17/2008

Be Prepared
This is a fun product but you do really need to be prepared as it states in the instructions.Know the steps and do a "Dry"practice run first.If you do this with a partner have them know thier part of the process ahead of time weather it is the mixing the timimg, or helping you stay erect during the two minutes it takes to complete the mould. This was my second try.The first one did not turn out well at all.The second try was better but not perfect as I couldn't maintain a full erection through the whole process. It would also help if they were to supply more of the moulding powder and a larger tube to avoid having the penis touching the sides and creating a bare spot in the mould.Also a slimmer vibe as the one supplied would have filled too much of my mould and not left much room for the liquid rubber.I went to a local Adult store and purshased a slimmer vibe and it worked well
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 6/14/2008

Fun!!!
This was so much fun to do! Definately a two person job though. If you read the directions all the way through a few times a follow them EXACTLY, it works great! Lay down newspapers first, it is messy. Now, I have a perfect replica of my hubby that vibrates! Couldn't ask for more!
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

SherryM1024 on 6/11/2008

Decent Product
This product was decent. It wasn't perfect, but after reading all of the reviews, we really didn't expect it to be. The mix did not set up too fast on us so we did actually get a mold, but there wasn't quite enough rubber so the replica is about an inch and a half smaller. This means that if you or your partner have a larger penis (7.5 inches or above), it probably will not do the full length justice. However, I've got to say that the detail really is quite amazing for the part that was replicated. Some users complained that it was too hard to use, but I don't agree. It's not exactly soft or rubbery, but is a little softer than a plastic dildo, for example. I do agree that it smells a little strange, though.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

no on 6/9/2008

awful
We did not succeed in making a mold the cement set too quickly.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 5/28/2008

read the instructions carefully
Wife loves the replica. Read the instructions and be ready the mold dries fast if the water is over 98 degrees. First time didn't work that great second time was a charm. I recommend this item.
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

ViperVC on 5/27/2008

Great fun.
Fairly easy to make. Make a couple of practice runs before making. Wife loves it but says it could be a little softer.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 5/18/2008

Maybe Next Time...
If the mold hadn't harden in less than 1 min then it would have been fantastic! Will defintely try again... my husband and I did fun the first time!
Was this comment helpful? Yes No
(0 people found this comment helpful, 1 did not)

Anonymous User on 5/15/2008

Works great
We cloned my willy perfectly. When the instructions give you a time, they mean it. Make sure you have EVERYTHING ready when you start.
Was this comment helpful? Yes No
(4 people found this comment helpful, 0 did not)

Anonymous User on 5/13/2008

Wow
That was the match that she was looking for. Perfect
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 5/9/2008

WOW
We had a terrific time making the clone. my exboyfriend is about a good 10in and maybe 5 or 6 around . needless to say we were shorted some of the mixture. But otherwise it was great. lol. Im going to buy several more and have a real life toy collection. lol
Was this comment helpful? Yes No
(0 people found this comment helpful, 1 did not)

Anonymous User on 5/7/2008

messy
my wife and i tried this product and it did not turn out right. found out that 2 minuets is actually like 1 and a half. move quick or it will set up on you fast.
Was this comment helpful? Yes No
(11 people found this comment helpful, 4 did not)

Anonymous User on 5/1/2008

Very messy
It was very messy making the mold then there is not enough filler to make a lifesize clone. it ended u being about 3-4 inches worth of material.
Was this comment helpful? Yes No
(4 people found this comment helpful, 15 did not)

Anonymous User on 4/30/2008

Worked Great
My wife and I are in the process of moving, with one of us staying in one place and the other being 20+ hrs away. I bought the clone-a-willy kit to give her something to "remember" me by during the 6 months we are going to be apart. The kit was easy to use (just follow the directions exactly). It is messy but clean up is very easy. My wife has been using the toy and loves it! Definitely a great product for couples that will be apart. Also, I wouldn't mind making another one now that I know the process, the first one didn't come out perfect but I know what I did wrong... Just be sure to read the directions well and enjoy!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 4/27/2008

a little disapointing
My husband and I puchaesed this item over a year ago. I am not happy with it. Was hard to get him centered, so ended up being crooked. Also, it came out with lots of bubbles in the rubber. It is also hard to keep clean. Even with seldom use and washing it before and after use the rubber is starting to look dirty, even after I've washed it. I have even tried to put it in a condom, with the end tied off, and even that does not seem to help. In all, I would not recomend or purchase again.
Was this comment helpful? Yes No
(0 people found this comment helpful, 1 did not)

Anonymous User on 4/22/2008

read directions carefully
kinda hard to do.didn't turn out the best but ok i guess
Was this comment helpful? Yes No
(0 people found this comment helpful, 1 did not)

Anonymous User on 4/11/2008

disapointed
we tried it, we were looking forward to this very much, but it was a total flop. My husband was rock hard, we followed the directions, but it came out looking deformed with bubbles and pock marks all over it. What a waste of 40 bucks!!
Was this comment helpful? Yes No
(15 people found this comment helpful, 7 did not)

Anonymous User on 4/11/2008

Need 3 sets of hands
Wife and I tried this 3 different times, first one we ordered and tried out...the molding solution hardened before he was inserted. Second one he tried on his own, that was a mistake, almost impossible to stay hard while focusing on getting EXACTLY the right amount of water at EXACTLY the right temp. Third and final try (three kits worth now) the process went smoothly with her mixing and him focusing on staying hard to insert. Once final product was done we found that some of the molding had flaked off into the rubber and the head portion of the replica was falling apart because of it. We have ordered many products from A&E and been very happy but this one definitely did not live up to the hype in our books.
Was this comment helpful? Yes No
(9 people found this comment helpful, 4 did not)

Anonymous User on 3/25/2008

What a buy!!!!!
All I can say is..... LOVE IT!!!!!!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 3/13/2008

Work Fast
The molding was really tricky. I stirred it for 1 min stopped for 2 seconds and it was solid with the spoon stuck in it. It's a good thing you can order more for half the price of the kit.
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 3/12/2008

Love it
Great fun! Works great! We had a blast making this together. Also a great gift idea.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 3/7/2008

horrible product
I did everything according to instructions even went a little short of the time so no mistakes would happen and the material went hard so I could not put my own willy into it. Impossible to make work, an incredible waste of money.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 3/5/2008

a real pleaser
my husband and i really enjoyed making and using this product. The only thing that we had trouble with is that the head of his penis was touching the side of the tube a bit, and when we put in the vibrator it shows a little from the bend of the penis. I had warmed him up a little bit to much cause when he put it on he came in it, but it still turned out great.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 3/1/2008

What a mess!
After reading the rave reviews for this item and talking it over with my boyfriend, we decided to spend the $39.99 to purchase this item. When we received the item, to our dismay, it had been poorly packaged and leaked all over the inside of the tube, envelope and on other items purchased. Needless to say it was ruined and immediately went into the trash. It really was a sticky mess! Since the other items packaged with this product were inside plastic packages they were salvageable. It was a total waste of money. Had the item been mailed in a box rather than an envelope it would have arrived in useable condition. Had we been able to use the item it may have been worth the money. Better luck next time I guess!
Was this comment helpful? Yes No
(1 person found this comment helpful, 1 did not)

Anonymous User on 2/25/2008

Military wives dream!!!
This kit should be issued with every military spouses marraige liscense!! It is great for those long deployments, and those long lonely nights alone! Just make sure to cover your mans "forest" with seran wrap so the mixture doesnt end up pulling hairs.... I love mine!!!
Was this comment helpful? Yes No
(3 people found this comment helpful, 0 did not)

Anonymous User on 2/20/2008

Great item, but be very careful!
This is a great item, but be very careful with it. When it says to immediately insert yourself into the molding gel, it really means it. I apparently didn't get in quick enough and could only get myself about 1/2 way in. I ordered some extra molding from the manufacturer and on my next attempt everything was fine. If you are curved, it is kind of a challenge getting the molding tube to form correctly, you have to cut the tube and put the pieces together to conform to your curve, but with some patients and work it does turn out great.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 2/20/2008

bj
its is fun. the review help a lott.
Was this comment helpful? Yes No
(2 people found this comment helpful, 3 did not)

Anonymous User on 2/2/2008

Oh My GOD
The making of this product was GREAT. Having a partner there to helps is great. After the molding portion was done, the mixing and forming was a snap. The finished product is great. An excellent asset to have for those nights when I am gone on business.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 1/19/2008

Short on rubber & rubber is too hard
Like a few others, the mold set up too fast. Still, my wife was able to pull it off. Definitely better with 2 sets of hands I would say. The detail was simply outstanding! The biggest draw backs in our opinion would be the amount of mix given to make the clone (we were a couple inches too short) & the rubber itself was more like plastic. There was nothing real about the feel. It's so hard, my wife won't/can't even use it.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/29/2007

What fun
I had to go through this process twice. I ran into some of the same problems as others who have reviewed this product. I wasn't "on the ball" when it came to mixing the powder, putting it in the tube and inserting my erect penis. Would have been easier if I had a third hand. I did order extra molding powder and get it to work. It was pretty detailed and I was surprised.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/20/2007

A little disappointed
We were excited to try this product but it didn't come with enough molding powder, so the mold ended up being too short if you know what i mean. :-( We're going to buy more supplies and try again though.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Unsatisfied on 12/6/2007

Disappointed
whelp was a great idea seemed like anyways and I even tried to research it through all the reviews that were here.... so I knew it could be messy and I knew we needed to be quick and I knew it worked best to have help with it. So I did all the above, my wife and me had lots of foreplay and I kept ready while she went and prepared the liquid rubber mix. Called me right when mixing it I ran in as she was pouring it into mold and as I hurried to push in the mix was already hardening and part of me went against the tube. I tried turining the tube like directions said I could but that didn't work because it had already hardend so will have to order plastic mold mix again to try to not have a total loss oh and by the way the "help line" was just a recording saying to email them or they would call back some time in the next 24 hours so might work in the end but a serious pain in the ass to get there if you ask me!
Was this comment helpful? Yes No
(4 people found this comment helpful, 0 did not)

Satisfied Cloner on 12/2/2007

Easy Solo Effort With Some Planning
I saw all the people who said you had to do this with someone else, but I did it as a surprise form my wife and it worked out fine. Lay everything out and have a drop cloth in place. Worrying about the mess is probably what slows people up. I had my computer going with my favorite vids and when the mix was made I was already semi-erect. Few seconds of stroking and I was good. I just concentrated and it worked. My wife loves it and she gets her DP fantasy without the messy entanglements of another person!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 11/22/2007

follow instructions
I would reading the instructions twice and following them exactly. I found that out the first time I bought this product and the second time it worked very well. So well I kept the mold and bought more rubber from the manufacturer to make another copy of myself.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 11/22/2007

Good times!
Amazingly simple to use - end result provides hours of fun. :)
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 11/17/2007

all alone
got dumped but didn't want to give up my fav part. Perfect!!!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 10/18/2007

Intriguing product
My fiance and I purchased this because he is changing duty stations and has the possibility of deploying. We had read the other reviews and thought it would be a fun way to replicate him. The process itself goes very quickly. We planned ahead and we still had a difficult time with the two minutes. Our mold didn't turn out perfect, but it is a truly amazing product. The vibrator is heavenly. We will make another mold, but our first one turned out pretty well.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 10/18/2007

Fun for Two
Got this for my wife, as I work an odd schedule and she's left alone several nights a week. Definitely helps to have two sets of hands for this one, but the result was quite pleasing for her. Half the fun of it is just in the making process!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 10/17/2007

The perfect companion for phone SEX!!!
My hubby travels ALOT!!! I had always wanted a "clone" to keep me company while he was away. I was so excited when I found this, we made it as soon as it came. It was a little messy, but quite easy to do. Hubby and I used it together when he was in town. I lost the first one, this is actually our second kit. Can't wait till hubby gets back in town to make it again!!!!!!!! Highly recommend!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

REALLY HAPPY!!!! on 10/10/2007

BEST EVER!!!!!!!
I had always joked around with hubby that I wanted a toy of him to have when he was not around! Then to my suprise I found this! I was soooo excited. I mixed in the kitchen while he got ready. He stood over a trash bag cause gravity will make some fo the stuff leak out, but no worries it dries and peels right off! The mold dried just fine, no problems there at all, we did have to turn the tube because he was touching the side at one point as long as you make sure you are in the middle of the tube or at least not touching sides you are good to go! once you are done molding you have to wait 2 hours before adding the rubber. We ran into a little problem when we added the vibrator and rubber to it. My hubby was a little curved in the tube more than what he naturally is but because he was touching a side we had to turn the tube slighty and it made him kinda curve in there so when the STRAIGHT vibrator went in it touched two side on the duplicate and the rubber did not go around that. But I promptly notified the company and they were happy to send us another one free of charge. WHAT GREAT CUSTOMER SERVICE!!!!!!! But I would recommending not putting the vibritor all the way in as the pic. shows. It is a VERY strong vibrator and would not need to be all the way in to have all the power!!! Needless to say even the slightly messed up one did the trick in a matter of min.s when hubby used it on me and when I did on myself. The best thing you can have as a girl to remind you of your man you can even feel and see all his viens and muscles turns me on just thinking about it!!!!!! ENJOY !!!!!!!!!!!!!!
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anxious  on 10/10/2007

Wonderful!!
My boyfriend and I tried this and had sooo much fun! It didn't turn out right because we got busy for too long and you only have 2 min. So don't waste your 2 min! I ordered another 1 and we can't wait for it to be in. We'll learn from our mistakes the 2nd time around
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 10/1/2007

cool idea
It's a cool idea ... but much more difficult to "do" than it suggests. The "molding" hardens super fast ... the directions say ~2 minutes, but in our case ... it was only about 30 seconds after mixing that the molding began to harden .... you'd have to act quickly. But perhaps with a little Team-work -- you can get it to work properly. Also, don't expect to be able to "try it out" right away ... it suggests 24 hours "set/cooling time" your new toy.
Was this comment helpful? Yes No
(13 people found this comment helpful, 1 did not)

Anonymous User on 9/26/2007

WOW
My girlfriend bought this for me and we can't wait to try it. She is getting excited and antsy to make it. We do reccomend that you open it carefully as one of the containers in our package was cracked and leaked all over everything.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 9/23/2007

1st clone
the tube isn't very big around, and if your member touches the side when you make the mold, the rubber will stick to the plastic and make rough edges when you pull your clone from the mold.
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 9/9/2007

Silly Willy
I tried to make this by myself, and was succesful! I loved it, I had to franticly mix and try to masterbate to keep myself up, and ended up ejaculating into the tube after it had been in, but it had fully dried when I did so it was ok. It was FUN, I cant wait to test this on my love. Messy but fun, DO NOT WEAR ANY CLOTHES WHILE ATTEMPTING THIS! KEEP WAY FROM ALL FABRIC! CLINGS TO CLOTHING! I now have a pair of shorts which are full of the molding material since I was in my kitchen with them pulled down, bad idea! But fun. LOVED IT!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 9/9/2007

Silly Willy
I tried to make this by myself, and was succesful! I loved it, I had to franticly mix and try to masterbate to keep myself up, and ended up ejaculating into the tube after it had been in, but it had fully dried when I did so it was ok. It was FUN, I cant wait to test this on my love. Messy but fun, DO NOT WEAR ANY CLOTHES WHILE ATTEMPTING THIS! KEEP WAY FROM ALL FABRIC! CLINGS TO CLOTHING! I now have a pair of shorts which are full of the molding material since I was in my kitchen with them pulled down, bad idea! But fun. LOVED IT!
Was this comment helpful? Yes No
(0 people found this comment helpful, 1 did not)

Unsatisfied Customer on 9/2/2007

SAVE YOUR MONEY!
I'm an analytical chemist so following direction is not a problem for me. The problem was that when I held the tube to my body quite a bit of the mold started dripping out. I had to really smash the tube against my groin to get a "seal" to form. I noticed that my penis was touching the side of the tube so I gently rotated the tube as per the directions. I had a timer set once my penis was inside of the tube and waited the full two minutes for the mold to gel. I checked the stuff that had dripped onto the floor and it had yet to gel so I waited another minute. I had long since gone flaccid and since the mold hadn't gelled yet I decided to give up. I pulled myself out of the tube and the remaining mold still hadn't gelled. Of course, just a short time after pulling myself out I tried to empty the tube and noticed that it had finally gelled. It would have done me no good to leave my penis inside though since I was flaccid.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 8/25/2007

Hard to DO!!
I recently bought this item and to no avail, it dried to quickly on us. I need to order another and try again!!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 8/18/2007

fun willy!
Can't believe how life-like to looks. We enjoyed making it and will probably make another one. The rubber sometimes makes a few bubbles while it is drying. The only negative thing is that when you are using it, the rubber willy kinda dries you out when you are using it-using a condom would be much better. All and all it is a real turn on seeing something that looks just your husbands....:)
Was this comment helpful? Yes No
(1 person found this comment helpful, 1 did not)

Anonymous User on 8/17/2007

Like My Willy
This is one of the best ideas I've ever come across. But... (there's always a but isn't there) it's a little hard- pardon the pun- to accomplish the uh, goal in such a quick period of time. My boyfriend and I did this one night, he is doing the work to get Mr. Happy to his happy place while I'm mixing and measuring in the other room. Then I run in and shove this goo filled thing onto Mr. Happy, which didn't go to well. We decided we need 3 people to do this- one to do the mixing & stuff, him to do the "hard" part and me, to do the fun part and help with the hard part. In the end, I did get my Willy replica- just a somewhat smaller version.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 8/10/2007

Fun but...
The rubber is a little hard and can be unpleasant. Easy to use, quick clean up, overall a lot of fun! It is an EXACT replica (down to pores and veins). Be careful when washing, we ruined the battery compartment :( Other than that, works like a charm. $40 worth of fun times
Was this comment helpful? Yes No
(3 people found this comment helpful, 1 did not)

Anonymous User on 8/3/2007

Awesomeness in a tube
It worked perfectly! It looks very realistic and feels fantastic! My boyfriend is flattered at how exact it is! I just plain love it! It is very fun to play with both!
Was this comment helpful? Yes No
(5 people found this comment helpful, 3 did not)

Anonymous User on 7/29/2007

An Exact Clone!
My wife was wanting to make a mold of my willy for a very long time. I found this and bought it. It was fun making it and my wife was very pleased with the results both looking and using! It was easier than expected. Highly recommended!
Was this comment helpful? Yes No
(2 people found this comment helpful, 1 did not)

Anonymous User on 7/28/2007

excellent
it is more realistic than anything I have ever been able to make. the easy to follow instructions tell you everything you need to know.
Was this comment helpful? Yes No
(1 person found this comment helpful, 1 did not)

Anonymous User on 7/13/2007

great fun, but the rubber odor is not so fun...
the thought of doing this was a huge turn-on for me! the actual process was even fun (you must be prepared and work quickly!!!)! however, i do not like the odor of the rubber. i have yet to use it with out a condom over top of it... the rubber smells kinda like new tires on a car, which is a mood killer for me. i would totally suggest this item to anyone, but will definately mention the odor issue...
Was this comment helpful? Yes No
(9 people found this comment helpful, 0 did not)

Anonymous User on 6/19/2007

Haha I love it!
My 6.75in by 2in (exact measure with straight edge from top base) didn't need extra rubber, even though I did order extra just in case. Read the directions beforehand though, and plan it out :)
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 5/31/2007

A Must Have!
This was so much fun. He really enjoyed making this with me. (If you do not want to put the vibrator in, then don't leave the inch below the mold like it tells you too. I enjoy every inch of my man, but I did what it said and didn't feel it up!) If you are unsure about buying- don't be it is well worth the money! It looks just like him!!
Was this comment helpful? Yes No
(12 people found this comment helpful, 2 did not)

Anonymous User on 5/14/2007

Verrrrry Interesting...
Right now my fiance and I live on opposite sides of the world. I had jokingly suggested this, because I honestly thought it would be incredibly sexy to get to masturbate with a clone of his penis, especially when he's on the phone while I'm doing it, or watching on webcam. I NEVER thought he'd go for it, and we were browsing other toys, sending links back and forth when he said, "You know, that WOULD be kind of cool..." So just before he came out for Christmas, I got a kit, and we gave it a shot. The only thing that sucked was that because his penis is long and thick, there wasn't enough molding goop to make a full casting. Oh, and for the sake of your guy? Risk losing some detail at the base and cover the base of his penis and pubic hair with cellophane. Otherwise, as he's taking himself out of the mold...SURPRISE! You just got waxed. I had enough forethought to avoid that mood killing situation. I have to tell you - there's nothing sexier than feeling "his" penis inside of me even when we're apart, and for him, well I think it's pretty hot for him to see "himself" penetrating both my front and back at the same time while doing it doggy style. Not for everyone, but DEFINITELY for us!
Was this comment helpful? Yes No
(17 people found this comment helpful, 0 did not)

Anonymous User on 5/10/2007

missing the real thing
this was not as easy to do as suggested. The first time we tried the mold set up before insertion and had to reorder mold kit. Beware use less temperature and make sure tube is not too long so that the mold completely covers all sides.
Was this comment helpful? Yes No
(7 people found this comment helpful, 1 did not)

Anonymous User on 4/20/2007

What fun foreplay!!
We had a blast making it! The directions are true to the print when it says read and do exactly as instructed. But I did it only one time and it turned out Great! The only advice I would tell others is that measure the tube only 1 inch longer then your member to ensure complete coverage. Also if you plan to use the vibrator, practice a few times inserting it in the tube with the cardboard so you can center it properly without it touching the sides (it makes a thin wall if you don't) Have fun!
Was this comment helpful? Yes No
(8 people found this comment helpful, 0 did not)

Anonymous User on 3/21/2007

3rd Times A Charm
If you follow the directions, things work great but there is not enough mixture (powder for the mold) or (rubber for the dildo) to make an exact replica if you are well endowed only enough to make 5/9 of the real me. After two trials, I have learned how much extra that it will take and bought from the reorder website so that the 3rd time will be perfect.
Was this comment helpful? Yes No
(8 people found this comment helpful, 0 did not)

Anonymous User on 3/15/2007

Fun and Games
We had a blast making "Willie". Strong vibrator, which is good. But, you have to work fast.
Was this comment helpful? Yes No
(8 people found this comment helpful, 0 did not)

babandit on 3/14/2007

Amazing detail
I bought this so that my wife and I could have fun making it and the detail was amazing but you do have to read diretions carefully and you'll have no problems.The only problem I had was it did not have enough of the silicone fill for it and it did not make whole copy of my willie so I emailed company and they sent an XL kit witch did work they where friendly and easy to work with.If you buy this you will have fun making it and she will have fun showing it off to people!!!
Was this comment helpful? Yes No
(6 people found this comment helpful, 1 did not)

Anonymous User on 3/14/2007

fun
great fun with your partner, except always turns out a little smaller than life size. but its still cool
Was this comment helpful? Yes No
(5 people found this comment helpful, 1 did not)

Anonymous User on 3/13/2007

awesome willy
the clone a willy is a perfect thing for your woman.It makes a perfect match of your penis even has the hole at the tip of your penis. But make sure you have someone to help you because it takes two people because you have to work things fast.
Was this comment helpful? Yes No
(7 people found this comment helpful, 0 did not)

Anonymous User on 3/13/2007

needed help
My husband had trouble getting the mold before the mixture set. We are going to try again.
Was this comment helpful? Yes No
(4 people found this comment helpful, 0 did not)

Anonymous User on 3/12/2007

a fun time
It was fun doing this with hubby. The kit was really easy to use just follow the steps. Only draw back is the dong when done has a strong rubber smell and it very hard rubber not flexable at all. I guess it just a novelty anyways. Had fun making it though.
Was this comment helpful? Yes No
(6 people found this comment helpful, 0 did not)

Anonymous User on 3/11/2007

Fun Fun
MOst def a fun project, though be sure to read those instructions and think through the whole process before ou begin. Gets much easier the second time.
Was this comment helpful? Yes No
(4 people found this comment helpful, 0 did not)

Anonymous User on 3/8/2007

tricky
Ive used similar products in the past without a hitch, so imagine my surprise when following the package instructions EXACTLY, the gel solidified too soon. I had to order a replacement, which we had no problem with.....you really gotta know what youre doing.
Was this comment helpful? Yes No
(5 people found this comment helpful, 0 did not)

Anonymous User on 3/6/2007

awesome idea
perfect if your significant other has a nice one
Was this comment helpful? Yes No
(5 people found this comment helpful, 1 did not)

Anonymous User on 3/6/2007

Great Idea...need two people
Some of the reviews said that it didnt work if they tried it on their own..they are right. I tried it as a surprise for my girl but its all a little too much for one person to work on themselves
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

anthony on 3/5/2007

More of me to go around !!!
My girlfriend and I are happy as hell with this product. Its great for play together of for her use when i'm not home. Follow the directions exactly and let the games begin. Well worth the purchase.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

angusmalcom on 3/3/2007

Fun time
I bought this for my wife and I to do something fun and sexy and it didn't disappoint. The end product isn't ideal, it had some porous spots and would be diffucult to keep clean, but it looks just like me down to the detail. The vibe is powerful, and it will give her something to remember me by when I am away on business. Follow the instructions very closely and you will turn out a fun toy.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Clone-A-Willy Fan on 3/2/2007

A LOT of FUN to Make!
This was a lot of fun to make! The instructions are very easy to follow and it is important to follow them exactly. It is best to help your partner out with the initial setup, so the erection is not lost in the process. I am a little disappointed with the rubber. In Step 6, you stir the Liquid Rubber and Liquid Skin together "vigorously" for 2 min. which created small air bubbles in the mix. Our replica is good, but the small air bubbles are visible on the surface and have left tiny indentions. Would be better with a smoother surface. Also, be careful and place the vibrator in the center of the mold. Mine got a little crooked and you can see it slightly on one side. However, the vibe included is good and strong! I noticed there are instructions to make a replica of a "crooked Penis." The instructions look easy (just one extra step in cutting the tube to fit your penis), but I do think the vibrator is too long and too straight to insert into a "crooked" mold. Still would make a great dildo!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 3/1/2007

Great!
Now when my husband goes away, I always have him here!!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

jtrane on 2/22/2007

A lot of fun!
what's better than a clone of your own willy? This kit is a little complicated to use....you have to be ready and fast, but it's well worth the effort.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

northern cali girl on 2/22/2007

fun for all
this product it fairly simple to use and it turns out pretty well just make sure your guy shaves first for best results
Was this comment helpful? Yes No
(3 people found this comment helpful, 0 did not)

Anonymous User on 2/22/2007

Complicated but fun
The product is a little complicated. The end product is worth any trouble.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 2/21/2007

LOVE IT!!!!!
The most wonderful invention!!! I can have my husband even when he is working nights.
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

YuM on 2/20/2007

"Feels Like I'm Being Double Teamed - By You!"
Is what my wife exclaimed. One word of caution - directions say to try to keep penis from touching the side of the tube, but it is okay if it happens - it is NOT okay to touch the side of hte tube! Even a slight touching of the tube will create a weak spot in the mold and could create leakage of the rubber liquid. Was able to salvage it by using some pressure on the tube to stop the leakage.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Happy in the Heartland on 2/18/2007

Our Willy
This is a great item. Fun to make for the both of us and of course what could be more novel then an exact replica of your favorite Willy? Be prepared before hand for best results but definately a worth while product!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 2/17/2007

its ok
IT is a little more complicated with than i thought it would be,maybe they could come up with a way to make it more simple.It is really cool however to have an exact replica.I would recomend having some help when you do it,somone to get the water the right temp ect.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 2/13/2007

Double the fun
A fun kit for couples who want DP play. More fun than just buying a toy and playing with that but to have an exact replica of your man's tool is just great. And for those who are particularly proud...you can display it on your mantle. ;-)
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

shorty on 2/11/2007

Its so real!
This kit really makes an exact replica! But you have to be careful no to smash the penis up against the tube! But its really fun to do, it really spices up your sex life. If you want something different to do while fore-playing, this is for you! And you get a souviner too!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 2/11/2007

COOL PRODUCT.
I liked the idea of this. Only a few complaints. The vibratior needs to be much stronger. You can't really feel it through the laytex. And It could be simpler to make. Trying to get it to the exact temperature and, mixin, pouring and trying to keep him hard is like being in a tri-atholon.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

R.Anderson on 2/10/2007

Great toy when the real thing can't be here!
This was a lot of fun! My husband and I made this when he came back from his weekly business trip. It was a little difficult because a lot of the mold fell out while he was positioning it on his penis. We were able to make a good replica, although the toy is not as long as the real thing! The vibrator in this kit is really great! I would recommend this toy to any couple looking for some fun in their relationship...but you may want to be seated or lean back so you get the best penis imprint possible.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Lovin Adam & Eve on 2/7/2007

Great for married military.
If your joe is anything like mine, he doesnt want you near anything even close to his "morale". This is great for deployment to keep the wives occupied, and great for when he's out in the feild. Make sure you put it away when he comes home, though. Joes like to give thier girls the REAL THING!!!
Was this comment helpful? Yes No
(2 people found this comment helpful, 1 did not)

Anonymous User on 2/5/2007

Sexay And Fun!
My significant other and I had sooo much fun making ours. It wasn't that difficult, and the results were highly detailed and amazing. Nice way to show others what you get without 'showing' them! My partner loves using it on my when we're doing anal. It's a neccessity for every couple!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 1/31/2007

fun for both
This was fun to make and the willy actually is a true clone
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

sofreshnsoclean on 1/28/2007

LoL
The kit was a lot of fun for me and i think my boyfriend, who wasnt as excited about it as i was...but quickly he saw the benefits...the fact that you have to rush rush rush for the first part put me under a little pressure, and he didnt stay hard once we inserted his penis because both of us started laughing...he stayed hard long enough though because we did get a pretty good looking mold, though a little smaller than the real thing, and we had fun tryin it out!
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 1/17/2007

REFILLS, REFILLS, REFILLS
You don't need to buy the whole kit again if you mess up, just go here to order refills for the mold or the rubber. ***REFILLS*** https://www.cawreorder.com
Was this comment helpful? Yes No
(13 people found this comment helpful, 0 did not)

BigDaddyWitDaCaddy on 1/17/2007

Messy
Make sure you use this in a bathroom withs the mats removed. It does spill alot out of the sides. But fairly easy to clean up once it dries some. My mold came out a little rough nowhere near as smooth as a dildo you can buy. But fun to use with the wifey. Especially with her trying to keep me aroused while I put it on.
Was this comment helpful? Yes No
(8 people found this comment helpful, 0 did not)

Anonymous User on 1/16/2007

this is so amazing
This is the best product in the whole world. One comment though, don't listen to the reviewers who tell you to cut one end off, that makes everything really messy. Just listen to the directions with the kit and all will be well. It makes a great activity for you and your significant other, and I was really impressed by how well it turned out.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 1/15/2007

Playtime in the kitchen
Ordered the product so that I'd have alittle something of hubby at home while he travels. It made for an interesting time making the toy in the kitchen. Kit directions were easy to follow.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 1/15/2007

Fun yet difficult
This was so much fun to make. My wife and I had a blast making the mold, and the anticipation of waiting the 24 hrs for it to set is also a lot of fun. Those few minutes while you let the mold harden turn out to be a lot of fun. However, they aren't kidding when they say this is difficult to make. READ the directions!! Also, after the mold is mixed and put in the tube I'd wait a few seconds before inserting the penis, other wise the mold will spill out of the tube and onto the floor. I had a problem of my penis touching the sides, I turned the tube as the directions said, but it never covered that area. Our replica did not turn out so well, it is only half the actual size and is very lumpy, but the detail is amazing. Overall it was a great experience, and we will probably try it again.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Jon on 1/14/2007

Great Item
After reading several reviews, I just had to buy one of these for my wife and I. I was able to do the clone and surprise my wife with her new toy. She loves how realistic it looks and how powerful the viberator is. This is a great item for married couples.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 1/14/2007

The funnest time!!
This was so much fun to make!! I use it all the time since he left. Every military wife needs one! This item was so realistic and is an identical replica of his penis, plus it vibrates.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Paul H. on 1/13/2007

Great way to add some fun to your lovers life !
This is a good way to make an exact replica of yourself and works pretty easy as well. Make sure you read the instructions before you start and understand them. Be sure to try and keep yourself (penis) in the center of the molding container provided. Goodluck all.
Was this comment helpful? Yes No
(0 people found this comment helpful, 1 did not)

Andrew on 1/12/2007

Not bad!
Me and my gf did this for when she is away, she's happy with it. The details are awesome. But I noticed that the mold kinda shrunk when drying. And you gotta be horny when u do it to stay hard hard when u mold it. Pretty easy to do. Depending on the penis shape, not always easy to not get the vibrator to touch the sides and show a little. I'd recommend it anytime, my gf loves it! My willy with a vibe? sweet.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Ken on 1/10/2007

Perhaps it's better with help
I tried to use this product to offer a holiday surprise, but failed at making the "negative" when trying to do so on my own. I followed the instructions to the best of my ability, and it does indeed suggest that it would be easier or more sucessfull with help, but for obvious reasons, I wanted to do it by myself. The negative came out with a lumpy texture in the middle, and I could not get my menber away from the side after insertion, and seeing such a poor result, I did not even attempt step 2 of making a posative. I am stratigizing a way of making another negative to use the materials for the positive kit with. We'll see how that turns out. Probably still worth the money, but I STRONGLY recomend getting some assistance.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 1/10/2007

Hard to use
It is a good product, but you don't have any time to use it. I was very unhappy with the time you have. I don't know how they expect you to be able to do the first couple of steps in the time they give you. It didn't work for me or my husband. Trying to keep him stimulated for the time it takes to make this was very hard, also you do need two people to make this or you will run out of time.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

HotKimber on 1/8/2007

Buy 2!
This is a great idea, except that it is hard to maintain an erection in cool liquid even with a ring. I loved having a replica of my hubby. It was a little funny & awkward the first time around. We'll get a second kit & make a bigger, better, new & improved version. LOL And having a mini egg to stick in the head would be absolutely wonderful rather than the stick.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 1/3/2007

Fun for everyone
An exact replica is almost an understatement. You can even see the veins! Making the thing, however, is for sure a TWO PERSON JOB. The old lady loves it.
Was this comment helpful? Yes No
(13 people found this comment helpful, 1 did not)

Anonymous User on 1/2/2007

highy reccomended
makes a great cooy, i reccomend it for navy wives for those long lonely nights. A plus is that the vibrator goes really fast
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 1/2/2007

Fun
This is a great product for both it is exactly what it says it does just follow the directions. We liked the double penitration and when im not around she always has my clone. Looking forward to other products like this one.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/31/2006

Clone-A-Willy Kit
A lot of fun to do. It takes a couple of days though. The final product is a little harder and smaller than the real deal but I expext this is because I was not up to the full limits. Anyway I would highly recomend this product for the fun of doing it.
Was this comment helpful? Yes No
(0 people found this comment helpful, 1 did not)

Anonymous User on 12/30/2006

What a hassle!!!!
I've been wanting this for a LONG time. Husband finally bought it for me for Christmas. First time we tried it, the mold firmed very quickly. As i was pouring, it clumped up. So we bought some more mold. Bought 2 bags just in case. Second time we did it, the directions said "Don't worry if your penis touches the side a little, you can still get a good mold". What it fails to say is that the mold doesn't keep the same form once it dries and it buckles a bit. So the spot where his penis was touching the side turned into a BIG hole. 3rd times a charm, right. Wrong! 3rd time we thought we had a very good mold. Managed to hold it where we thought there was no touching of the side. Waited for it to dry, and put in the rubber. About 10 minutes later we noticed that the rubber was leaking out of a small hole on the side of the mold. No biggy, it'll try and stop to leak. NOPE. Still leaking, the rubber is now on the outside of the mold and on the inside of the tub. I HAVE A MOLD OF MY MOLD. Extremely unhappy. If you or your parnter is thick and bent, i don't recommend buying this. One, because of the chance of touching the side, and two, if you decide not to insert the dildo, there isn't enough rubber for the bigger gentlemen.
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Mr. and Mrs. Going-Back-to-Iraq on 12/28/2006

Perfect for a 15-day leave!
We had 15 days free when the husband came back from Iraq for Christmas and this kit was a perfect activity for us! We have no complaints about either the kit or the process. The kit gives you everything (and I mean EVERYTHING) that you need and the instructions were very simple to understand. Definitely something you need 2 people for ... but how fun is making a dildo yourself?!? The finished product is a little stiff but what penis isn't? Kudos for sure! Lots of fun and a great idea for wives whose husbands are deployed. Great replication and very realistic. You can see every vein, every minute detail.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous on 12/22/2006

messy but fun
worked allrite if your not hung like a horse you can make 2 a little messy and you got to stay hard or else
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

mchandford on 12/18/2006

LOTS OF FUN
This product was exciting because it was something new. It was fun to make and then we got to have fun using it afterwards. I know it's already been said but It is really great for military spouses.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/13/2006

Don't Know Yet
When I purchased this Clone I bought it for a christmas gift so, until that time I can not give a rating as to how it works or so forth. However I would like to rate a 3 star for now as to my exspectations. Thank you for your time so far.
Was this comment helpful? Yes No
(0 people found this comment helpful, 2 did not)

Anonymous User on 12/11/2006

Good
Great for the girl friend when b/f away!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

kingcobra on 12/6/2006

Could Be Useful
I think I want to get this so that I can clone my penis. That way if someone tells me to go "eff" myself, I can just go home and do just that. *eg* And it would make easier for me to comply with the command, "Why don't you just go suck yourself?!?"
Was this comment helpful? Yes No
(2 people found this comment helpful, 5 did not)

Anonymous User on 12/6/2006

can't do it alone
I tried to do this alone as a surprise for my wife. BAD IDEA. impossible to keep fully hard and follow directions at the same time. I have a replica of a semi....with another person it would have worked better. But the other complaint is that the directions say the mix can be lumpy and it will still work. My final product did not come out right from the lumps and air pockets in the mix before insertion. The directions said it wasn't a problem but it definitely left marks on the final product. Also, I have tried calling the number several times to get new materials and keep getting a "message box full" message and can't get through. Very frustrating...wasted $40.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/6/2006

Clone A Willy
Need to have 98 degree water. Also needs to be ready and inserted within 2 minutes.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/4/2006

Fun to do, good copy of my husband
If you follow the directions closely, it's not too difficult. We took our time, and it came out well. The instructions tell you not to rush in letting the mold cure, but we let it sit overnight, and it shrank a little and water condensed in it. A few hours would probably be better. The end product was a very realistic copy of my husband, but I wish the color was a little more lifelike - it's skin colored, but kind of greyish (a little dead-looking).
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 12/4/2006

good for deployed spouses
this was fun and easy to use.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/29/2006

Great fun!
After following the advice here and carefully following the directions, the wife and I had a great time creating a perfect likeness of me! We've had lots of fun with my "twin" since too. Excellent product!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/27/2006

pocket pal
this thing is great! follow the directions! it's so exact my wife won't put it down. she loves having two of the old boy to play with!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/26/2006

Good product with a bad point
This prouduct is amazing its so exciting making it now using it on the other hand i dont know the molding powder mixture dries very fast at 2 minutes exactly it starts to ha chance to harden i didnt even have a chance to pour it in the tube so i have to order more mold powder read the instructions carfully it says i found it kinda confuusing good product may not work your first try though
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

D on 11/21/2006

Just what my girlfriend needed
My girlfriend was uncomfortable with the idea of a dildo and had never used one so a clone of my willy was just what she needed. Not only can she get satisfaction when we can't be together but it taught her better ways to use my penis. She's now as comfortable with it as I am.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/21/2006

Happy Couple
This is fun not only to play with but, my husband and I had fun making it! It showed every little detail. You just have to make sure to try and get the lumps out of the powder before you mix it with water. My husband loves watching me play with his clone!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/21/2006

Clone-A-Willy
I absolutely loved this product. It worked perfectly--it truly is an exact replica. It was very fun and easy to make (as long as you read the directions entirely first). The best part is how turned on my lover got that I wanted an exact replica of him.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/20/2006

Just Made A Mess
The concept is great, but it only made a mess.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/20/2006

anonymous
It was alot of fun to do, it helps having your partner to help, makes an exact replica
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/18/2006

STOP BEING SO COCKY!
Yeah, sure it can come out right and for those who it worked for keep patting yourself on the back. But I tell you it can f- up really easy. And when it does you feel like you just pissed $40 bucks down the drain. Will I order the mold product again? Yes. Will I make it work next time? Yes.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

usafmommy23 on 11/14/2006

hard to handle
i found it a little tricky to get it out and it had a few wholes in it because my husband was too close to the tube when we poored the stuff in. but once we got it out it looked just like him so it deffinently is a clone a willy. i would deffinently recommend this to someone who likes the look of your lover. but it is really sensitive so if you touch the sides it will show. its a good buy though you will enjoy. i no i am.....
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/13/2006

best product of this type
my husband and i have purchased a couple of these kind of kits, this one was by far the easiest to use! Its very realisitc and the detailing on the clone is amazing.. it even got the little flap of skin that connects the head to the shaft underneath. the only thing i did not liek about it was well the rubber is so hard afte rit sets that i can't use it.. :( but other than that its a great product!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/10/2006

This is a lot of fun
Now when I travel, my gilr can close her eyes and play with her new 'statue' and make beleive I am still there...
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/7/2006

Fun project!!
Fun for both to do, wife can use while away.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 11/6/2006

FUN!!
This was a little stressful to make, with the percise timing and temperature. You may need a creative imagination to keep him hard while the mold is forming. ;) Tip: Make sure his peice isn't touching the side of the tube at all while the gel is setting, otherwise you'll get this odd flat spot.. Tip #2: When you insert the vibrator into the plasticy-goo, make sure it's deep enough, and again, not touching the side of the mold. Astetically, it looks nicer if the vibe isn't sticking out super far.. All in all, it was fun to make, and it's my favorite toy (even with the flat spot). I'm excited to try it again when my man is home from overseas!!
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 11/2/2006

Great Item
This is one fun toy. The best part is having her keep you hard while it drys. Now she cant get enough of me
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

The Hulkbuster on 10/31/2006

fun for couples
This is definitely a fun item to purchase. My girlfriend and I tried it out and it was fun to make the item. Not so much use as a functional item, but we still have fun with it. My only warning is to follow the instructions to the letter and to not fill up the tube with too much of the mold or else it will overflow! :)
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Anonymous User on 10/31/2006

Wonderful for us Military Wives
My husband was already deployed to Afghanistan when i ordered the clone-a-willy. i mailed it to him and he made it while i was watching on the webcam. He mailed it back home to me, and well... it's great!
Was this comment helpful? Yes No
(2 people found this comment helpful, 0 did not)

Mary S. on 10/28/2006

ALOT of fun!!
This is alot of fun to make with the hubby. However, it is a little awkward to be mixing and trying to keep him hard at the same time. His erection seems to shrink as soon as the mixture hits it. I always end of with the multiple version but hey... they are so much fun to make.. I've done it 3 times already!!!
Was this comment helpful? Yes No
(6 people found this comment helpful, 1 did not)

Anonymous User on 10/27/2006

WOW WOW WOW
How amazing this was to get an identical replica of my man! I was so siked when I finally unveiled the replica. Veins...texture, etc. AMAZING! The process its self was very messy and you had to be quick. Also it's kinda difficult trying to keep him stimulated while sitting his "guy" in goop! The whole process took about 24 hrs but well worth it. They should also give you more mixture.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 10/25/2006

HAVE AN NOTHER FOR YOUR WIFE
If you like a Double penetration with out another body you will like this one!!
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

David in VA on 10/19/2006

great results
I was skeptical, but it turned out great. My wife and I counldn't believe the detail of the "finished product". I studied the directions and web site alot to be sure I didn't screw it up before I made the mold. Every little wrinkle and vein showed up, I was very pleased. My wife absolutely loves it. I would buy it again, but I don't need too. My wife says she wants to display it in our bedroom, I don't know about that, she never made me that offer! But then again the clone doesn't talk, just performs!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 10/13/2006

STUNNING DETAIL!!
this was a fun one to do. i could not believe the detail!!! every little bump is on the clone!! make sure you both completely get the instructions. its very easy but when you are about to "put it in" make sure your man pushes the whole tube tight against his body. if that is not done the mold will run out and then it will not turn out right. took a while to get in the mail. was not very thrilled about the use part of the clone. it is VERY VERY hard. has no give at all. for me...its unconfortably hard. so if you are looking for something that feels very real this is not for you.
Was this comment helpful? Yes No
(4 people found this comment helpful, 1 did not)

Anonymous User on 10/9/2006

Almost Perfect
It was a little messier then I exspected it to be but it was a perfect replica of my husband's penis. It's definitely worth it.
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

tugboat on 10/8/2006

Not a solo undertaking
Always wanted to try this product. I see so many possibilities for the created mold. Ice for drinks, Jello pops, chocolate..... Well you get the idea. So I finally get around to ordering it and when it arrived I went back over all the tips here and was ready to do it. So stupid me couldn't wait for a helping hand. I figured I'd bring out the porn, keep my mind on sex and all would be well. Yeah, not so. Seems I was fooling myself. I got off to a good start after sorting out all the pieces, cutting the tube, taping it, etc. I got the hot water in the bowl, got nice and hard, poured the molding powder in and was mixing with one hand and then realized that I am unable to move my arms in two different directions. Ooop! Okay, so then my mind jumped into troubleshooting mode and there went my hardon! I mixed as fast as I could, poured it in the tube and put all I had into getting hard again. I thought I did a great job of it, but not so. I picked up the tube and rammed Mr Happy into a solid mass! I was so close! That will teach me to rush into something I'm not prepared for. I needed the gf there to help me. Well all isn't a total loss. I was able to order extra molding powder. Should be here soon! So while I wasn't successful in my attempt, I still give the product a rating. I might have failed, but not due to the product.
Was this comment helpful? Yes No
(4 people found this comment helpful, 0 did not)

Furburglar on 10/6/2006

Good product, bad planning
I have read all the reviews and still had problems with the product. It didn't turn out right and leaked out the side of the mold. It took over 20 days for delivery which is unsat. I want to try again but only if I get a discount on my next order.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 9/29/2006

Satisfied
Very simple to make, read throught he instructions a few times first to make sure you do everything right and it's a breeze! Feels nice and warm too! Makes an exact replica, the detail is really crazy. One word of advice, have something or some one there to keep you entertained.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 9/27/2006

Works great...
If you read all the directions carefully and have everything planned out and ready, it can be totally worth it. Definately something to do with your parnter, someone's gotta help keep you hard.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 9/20/2006

I agree with most others was a bit clumsy but easy
I found it a little confusing in the reviews and decide to order two sets to try to make sure I got it right. Followed the instructions I do recommend something to keep you stimulated or could be a problem. Got it right the first time gave the other one as a gift for a freinds shower never saw somebody so surprised and laugh so hard. Good time had by all.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Steelerzchick on 9/18/2006

Clone-A-Willy
A+ it was lots of fun, helpful hint: when setting your willy, bend over slightly, or all the goo will fall out and your willy will be deformed
Was this comment helpful? Yes No
(1 person found this comment helpful, 0 did not)

Anonymous User on 9/15/2006

exciting fun
lots of exciting fun, is messy but works great just make sure follow instructions
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 9/12/2006

THE best toy!
Not too difficult to use, just follow the instructions. It really is a perfect copy too! Just make sure he's really hard to get a perfect copy.
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

ems on 9/6/2006

Amazing!!!!!
If your looking at it , buy it! it is most definately the best purchase we made!!! Great fun making , AND using
Was this comment helpful? Yes No
(6 people found this comment helpful, 1 did not)

Happy Military Wife on 9/1/2006

Military wife Must HAVE!!!!
this product is both fun and amazing. My husband had a little difficulty keeping things hard and was sure he'd ruined it, but it turned out great since the stuff dries VERY quickly. you really need to follow directions and suggestions CAREFULLY!!!
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 8/31/2006

sucks
im sure after 4-5 times of trying you could get a successful atempt, but as for me, two tries is enough, too hard to do without someone elses help
Was this comment helpful? Yes No
(0 people found this comment helpful, 0 did not)

Anonymous User on 8/30/2006

Experamentor
This was alot of fun for me and my husband to use. It was easy and we even got a second one because of how much we enjoy using it and making it. A must have for anyone in a military relationship or anyone who just likes experamenting. My husband and I both really enjoy this one.
Was this comment helpful? Yes No
(18 people found this comment helpful, 0 did not)

Gator Roller on 8/22/2006

Fun AND practicle
This was fun to create and it comes in handy when wifey and I are feeling kinky....this was the only way to coax her into a DP. A little awkward to make while maintaning an erection, but we pulled it off. As was said before, FOLLOW THE INSTRUCTIONS!
Was this comment helpful? Yes No
(22 people found this comment helpful, 2 did not)

Pole! on 8/13/2006

How cool is this!!
This kit was great! Was going to try and do it on my own to give to my girlfriend, but its like trying to cook in the kitchen and try to keep a hard on. Doing it together was a must. Worked great! Wished they would give more filler for the larger guys. Has a strange smell when it is done (only been 2 days, could go away though). Over all, it was fun, and just cool to see a perfect copy of myself. Read the instructions!!!!
Was this comment helpful? Yes No
(5 people found this comment helpful, 1 did not)

Moonwyrm on 8/4/2006

Great fun with one major setback!
It would have been great fun but they left out one Major important point in the directions. They stress that the mold must be formed quickly, but they really should mention that if, done too quickly, it'll leak out around the edges of the tube before it even starts to set! We used a hobby knife to try and fix the errors caused by all the spillage, but it still came out rather deformed. Would have been great fun, but that one little problem kinda ruined it.
Was this comment helpful? Yes No
(10 people found this comment helpful, 0 did not)

gigi4jj on 8/3/2006

I would buy again
Instructions were very clear and easy to follow. The hardest part was waiting 24 hours to use our new toy! The detail was amazing. The only thing that would make this better would be if the rubber dried softer. When finished the toy is quite hard and would feel better if it was a softer plastic. Even so, I would buy this product again. The whole process was fun to share and my man got a kick looking at "his" penis penetrating me close up.
Was this comment helpful? Yes No
(9 people found this comment helpful, 0 did not)

HAPPY MARINE WIFE on 7/20/2006

EXCELLENT FUN FOR BOTH OF US!
My husband and I got this so that I could have a bit of him at home with me when he goes back to Iraq for his 3rd tour. It was a fun project! Make sure you read the directions carefully!! We left the sealed end of the tube on it like the directions said and it worked fine. He stood up to insert his erection and then when he had it nice and snug he sat down and left it on for a good 4-5 min. In the meantime I gave him a "Show" to help him maintain his erection. One bit of advice when you see his penis touching the inside of the tube make sure you turn the tube as early as possible to try and get the mixture to cover it. It's not a waste if there are parts that touch the tube...they just come out as smooth spots in the mold. We let the mold sit for 36 hours without touching it and it came out GREAT!! It was amazing to see it in exact detail! The vibrator is pretty strong too... the vibrations reach all the way to the head! Which is pretty great for an 11" Penis! All in all! Well Worth the 40$ Just follow the directions and you will be fine. The themometer that came with it was crap... I just stuck a meat themometer in the water to get it to the right temp. I heated the water to over 100 and let it sit next to us while it cooled I got him "READY" it worked out great! HAVE FUN!
Was this comment helpful? Yes No
(31 people found this comment helpful, 2 did not)

Anonymous User on 7/14/2006

you may want to next-day the package
it took a over week to get the pack through snail mail
Was this comment helpful? Yes No
(4 people found this comment helpful, 9 did not)

Anonymous User on 7/13/2006

a fun project for the 2 of us
After reading other reviews, we found that a larger than average penis still works! A great personalized dildo. Easy to follow directions make this an entertaining project... but I want it done now, I don't want to wait another 24 hrs to use it!
Was this comment helpful? Yes No
(5 people found this comment helpful, 2 did not)

Anonymous User on 6/27/2006

Great fun!!
This kit is a neat way to have a replica of your man and it even comes with a vibe. The only thing is, read the reviews, and make sure that you follow the directions and read them before you start the process. My boyfriend and I had a problem and we have to order more of the mold mix because we waited too long and the mix hardened before he could get into the tube.. quite a bummer but the company's number is on the directions so if you do need more of the mix you can order it through them and it is not too expensive. Other than that, have fun!!!
Was this comment helpful? Yes No
(16 people found this comment helpful, 1 did not)

Anonymous User on 6/26/2006

Comes out EXACTLY true to form!
Let me start off by saying: Read the instructions a few times before you begin, and make sure you have everything close by for quick access, because everyone is right, this stuff DOES solidify fast! Some people mention cutting off both ends of the tube, so that's what we did, and i wish I hadn't! When you put the mixture into the tube, dont have your man lay down and put his willy in so you can pour the mixture into the top, do as the directions say, and have him insert his willy into a nearly mixture-full tube. No matter how hard he held it against his body laying down, it STILL dribbled out the crack at the bottom, and instantly bonded to our towels and his pubic hair! Its like rubber jelly and a little annoying to remove from terrycloth (downright impossible) if you let it dry! so use old rags or papertowels. ALSO, as fun as it still was, it's still hard for it to be a "turn on" so we had a little trouble with his willy staying the same size through the whole process. We ended up with a half-erect rendition when it was all over. I advise watching some porn while doing this project! I had fun doing it, and I don't think he minded being subjected to my experiment, but I wish I had one more kit so we could do it perfectly! I refused to throw away his half size willy-copy, because I swear, this stuff captures EVERY single pore of skin. It would capture a fingerprint! I kept thinking of all the cool stuff I could do with it other than the willy. haha! Its a great buy if you are looking for something fun to do with your hubby and you have a little patience!
Was this comment helpful? Yes No
(37 people found this comment helpful, 1 did not)

Anonymous User on 6/26/2006

just wonderful
I bought this because I love to suck, but want to be filled at the same time. The detail this brings out is remarkable. There are directions for curved shafts, if you read closely. The only problem we had was I cut the tube too short. I didn't think about the fact that he would have it pressed so closely to his body (well, duh). I think the folks who cut the closed end off and filled it that way were probably on the right track.....I'll try it next time. OH.....I do have an allergy to latex, and was a little worried about the "liquid rubber" but I have used the clone quite a few times and no adverse reaction!!!
Was this comment helpful? Yes No
(5 people found this comment helpful, 2 did not)

Anonymous User on 6/23/2006

Follow the instructions exactly as stated.
This product works great! I sent one to a friend who said she'd sleep with me if I wasn't married. Is that cheating? When your kit arrives, look for the re-order kit to order more supplies because really, the more the merrier!
Was this comment helpful? Yes No
(2 people found this comment helpful, 4 did not)

Jena & Jeff on 6/23/2006

THANK THE REVIEWERS!
My husband and I want to thank all of you who posted reviews for this item. It made all the difference! We took everyone's advice...and were thrilled to come out with a near perfect replica! It's nice to have my husband with me even when he's not home!
Was this comment helpful? Yes No
(4 people found this comment helpful, 3 did not)

Anonymous User on 5/5/2006

Definatly Try this, Worth The money spent!
Me and my boyfriend decided to try this after we seen it here. It wasnt as difficult as it seems, as long as you have your stuff together then your good to go. I do recomend cutting off the top and pouring it, because when he stuck his penis in, it was messy. The detail was amazing, expecially around the head of his penis, i cant believe how life like it looked, the only problem we had was there was air pockets when we poured the rubber so along the shaft was a few indents which are not normally there, and at the bottom on one side you can see part of the vibe. but the vibe is great. We are definatly going to try this again, just so we can have two. Next we are going to buy both kits, one for him and the other for me. Definatly try this product, you wont be out of your money.
Was this comment helpful? Yes No
(7 people found this comment helpful, 1 did not)

Anonymous on 4/16/2006

It really works!
This is a good product. It is tricky though. I read the reviews first, and that helped me. Be sure to put something down, that you can throw away, on the floor when you do this. It's very messy. Also, have someone help you stay hard. Either by touching or visual stimulation. If you use a coc*ring, it will come out in the mold. I used one. I think it made the clone look less realistic. When you mix the powder into the water, don't try to mix it very well(It's supposed to be lumpy). It takes too long and it gets hard very fast. I don't recommend waiting at all, before inserting your penis. Just do it quick and press it against your body to keep it from spilling out. Don't get discouraged after your first attempt. You can order more powder. It's really cheap for that stuff. The liquid rubber is the expensive part, so make sure you're happy with the mold before pouring the rubber.
Was this comment helpful? Yes No
(21 people found this comment helpful, 0 did not)

Anonymous User on 4/9/2006

good - not enough rubber
This was really fun to do. The only complaint I have is that there was not enough liquid rubber to fill the mold, even when the vibe is inserted. I'm a bit large (almost 8" and quite girthy) so I was disappointed when the replica was only 6" long.
Was this comment helpful? Yes No
(6 people found this comment helpful, 4 did not)

Anonymous User on 3/28/2006

Not too bad
Its really not bad great realism and does you justice. Just make sure all the molding gell goes down to the base or it will cheat you a few inches. Overall very good product
Was this comment helpful? Yes No
(15 people found this comment helpful, 1 did not)

yoseminy on 3/23/2006

Its ok if it didnt work
I bought clone-a-willy and of course I was too slow with my willy and the hardening of the molding. It was simple all I did was call 1-800-917-2692 and I bought 2 bags with shipping and handling and it was under $15.00. I will wait now for the new bags of molding.
Was this comment helpful? Yes No
(16 people found this comment helpful, 3 did not)

Anonymous User on 3/22/2006

Great Idea
I highly recommend this product. Just take the time to read the directions, and read the ratings here and you'll come out with a perfect copy. I DO recommend not trying this alone, i did as a surprise for my wife and the mold set too fast, and its really hard to concentrate on mixing, pouring and staying hard at the same time. Other than that, try it, youll love it.
Was this comment helpful? Yes No
(16 people found this comment helpful, 0 did not)

Anonymous User on 1/28/2006

Great idea, and fun but hard to do!
My boyfriend and I bought this because he is leaving to Afghanistan in a month. When we got the kit we had read some of the reviews about cutting off the closed end of the tube and pouring in the mix. We instead decided to do it the way the instructions say (fill the tube/insert penis). The instructions make you feel like you are rushed to get the mix in the tube so in our haste we did not think clearly and made a huge mess! We ended up spilling alot of the stuff on the floor so him mold was WAY shorter than him...also he had trouble staying hard (Which is something we did not even realize till after our mold was complete) I like my "cloned-willy" the detail (veins, etc) are amazing and if we would have done this correctly it would have been great! I recommend this but want to give a few tips: Do NOT hurry!!! The instructions give you 2 minutes to mix, pour, and insert...our mix was very runny so I suggest you let it thinken just a little before inerting your penis....This definitly needs two people! If you decide to do the mold according to the instructions make sure you are leaning over while inserting your penis into the mix or else you will have a HUGE mess! Have fun with it! We had a good time and even though it did not turn out perfect it is still him (just shorter, haha). Also, I saw some reviews where people are saying you cannot order more molding mix there is a website on the instructions where you can order more. (Sorry I don't have it, threw my instructions away and forgot to write down the site)
Was this comment helpful? Yes No
(59 people found this comment helpful, 1 did not)

Anonymous User on 1/21/2006

Awesome!!
Awesome!! Just read other peoples comments. Everyting has all ready been said about how awesome it is
Was this comment helpful? Yes No
(13 people found this comment helpful, 5 did not)

Anonymous User on 1/10/2006

Awesome!! Worth trying for sure!!!
I bought this to make a replica of my husband, and it worked great!! I followed the advice of people on here and had him lay down, then we cut off the sealed end. After he was ready, we put the tube over him, and I poured in the mixture around him. It was messy because I used a large bowl to mix the powder & water, and pouring from that huge bowl into that tube was not the best idea! Oh well! Still worked amazingly... One more word of advice though- Trim your man's hair down there because if some of it is in the tube around the base of him, it will be harder for him to pull out of the tube once the mold hardens... his hair was stuck in the hardened mold! That difficulty made a tear in the bottom of our mold, so later on some of the rubber stuff leaked out of that part... All that resulted was a slightly shorter replica of him... we'll probably try again so I can make one with his full length. We just watched a porn DVD while doing this, and I made sure he focused on that, and he stayed hard with no problem... I can't wait to try this again!! It's great! I love the replica, it's so exact!!!!
Was this comment helpful? Yes No
(21 people found this comment helpful, 1 did not)

Anonymous User on 12/29/2005

maybe again
I would love to try it again with my husband because the first time we tried it, it didnt work out just right. It was hard for us to keep it up and pour the mix in without making a mess. Maybe next time we will do it with friends so we are not out $40.o
Was this comment helpful? Yes No
(13 people found this comment helpful, 7 did not)

Anonymous on 9/8/2005

Almost Perfect match
My husband and I bought this kit for use before he went to Iraq. Now that he's there I am so happy with how it turned out. Simple instructions but do not try this if you are the only person around. Two people is almost a must have. In my experience the people that filled the tube from the closed end were definately the smart people, if you pour all of the molding gel/liquid into the tube then stick yourself in you will need to be over a trash can or something because of the over flow. Will be buying again once he returns home so we can perfect the mold...
Was this comment helpful? Yes No
(35 people found this comment helpful, 1 did not)

Anonymous on 9/6/2005

You wont regret doing this for Her
After some convincing of my other half, I convinced her that this would be the ultimate for her while giving me oral. She loves to suck but also wants me in her at the same time. Well, this IS the answer. My only suggestions to those who have it or are wondering what its like to use the kit. First, make sure you are 110% hard. Get hard as a rock and use something to wrap around the base of your penis, because you will most definitely be distracted making the mold, if not laughing hysterically while doing this. I (we) used one of her hair bands to make sure I didnt deflate. Second, the instructions tell you to wait like 1 or 2 minutes before inserting yourself into the mold. Id recommend waiting until you feel the mold starting to gel up, as it is quite liquidy right off the bat. Third, the vibrator that comes with it, we didnt put it in the molded penis, we just added it to our collection. (She swears the vibrator was the best ever. Go figure!) Hmmm, other than that, follow the instructions and enjoy it (or should I say watch her enjoy it) and watch your lady get off with you and your CLONE! Heh, one more thing, its kinda cool to actually see what you look like. It is an EXACT replica. I do mean EXACT.
Was this comment helpful? Yes No
(103 people found this comment helpful, 4 did not)

Anonymous on 8/22/2005

COMPLETLEY AMAZING!!
My girlfriend and I had one of the HOTTEST nights ever molding my penis! It was really easy to do and I don't understand enyone who had a problem. All you have to do is follow the directions (they even have simple to follow pictures) and you will have an exact copy of yourself. Unbelievable. Making the mold felt kinda good too. It was really warm. Something new I could actually put my dick into that didn't get me in trouble! We've already told all of our friends. Now whenever I'm away, my girlfriend has my best part with her.


Was this comment helpful? Yes No
(19 people found this comment helpful, 1 did not)

Anonymous on 8/11/2005

You need to think about this before you do it
i got this thinking it would be really easy and listened to alot of people on these reviews. it was a mistake. Though i can see this product would have worked real well, it was difficult to do. I tried what people had suggested, cutting the top off and having my girlfriend pour the mixture in. i should have been laying down. the directions said stand up. the mixture started pouring all over the rug as it ran out of the top and the bottom of the tube. i started getting upset about the rug and next thing i knew, i was soft. this product doesn't give any time for second chances either. it hardened way too fast before i could get myself erect again. i wanted to order another powder mould kit because i'm confident i could do it right this time but they are not available. think this through before you do it otherwise you will be out $50 for nothing. i can say though that if i did this right it would have worked perfectly. a word of advise, but some erection creme with this just incase anything happens, that way you can't make a mistake.
Was this comment helpful? Yes No
(16 people found this comment helpful, 5 did not)

Anonymous on 7/21/2005

Girlfriend Loves it!
My girlfriend loves that when I'm gone she can still have me. It was easy to use, I suggest the same as others have, cut off the sealed and pour in the mix so that it surrounds your erection. Anyway, it's one of the best $40 I've spent on sex toys. My girlfriend loves getting double teamed by two of me. Would recommend this for couples.
Was this comment helpful? Yes No
(16 people found this comment helpful, 1 did not)

Anonymous on 7/7/2005

Hard to do by yourself
My first attempt didn't work too well because it was difficult to keep myself hard while trying to get everything ready. I was hoping to make a mold as a surprise for my wife for our anniversary but I ended up needing her assistance. In order to get a second chance at it, I had to go to the local discount store and buy more mix.
Was this comment helpful? Yes No
(15 people found this comment helpful, 2 did not)

Anonymous on 6/22/2005

it works great
i bought this not really sure it would work or not but it did and its great my wife loves it it has become one of her favorite toys mostly because of the detail very easy to read directions the only thing i didnt like about it was the mixture set faster than it said it would but it worked out good in the end anyway
Was this comment helpful? Yes No
(10 people found this comment helpful, 0 did not)

Anonymous on 5/30/2005

FANTASTIC DETAIL , BUT 68 DEGREES IS COLD!
I bought this to experience the sensation of anal penetration by my wife, in order to improve my technique. The detail is FANTASTIC. NEED A HELPING HAND TO EITHER KEEP YOU UP, OR MIX THE MOLDING SOLUTION. I have to agree with the earlier critique, pour it in from the uncut end and let it surround your penis. Stay concentrated, keep your butt muscles tight because it sets fast. There is no easy way to 'insert' into the tube except to lay on your back. I mixed and stroked at the same time and got decent result ... BUT 68 degrees IS COLD! I WAS able to insert a portion of my balls into the tube due to some trimming of the tube, (remember, filling from the other end) but the sudden cold temp caused me to somewhat 'shrink' a bit. So be sure you're as hard as a rock, lay down, and keep stroking. Let the other hands do the mixing, and pouring. Don't rush it, it'll work out. So now I wait for my first anal penetration ... by me!
Was this comment helpful? Yes No
(9 people found this comment helpful, 4 did not)

Anonymous on 5/11/2005

SPEED IS A KEY
It might have turned out if I knew the mixture would start setting up within 45 seconds or so, not the two minutes the directions say. So be quick and ready or it will come out like a clumpy glob.
Was this comment helpful? Yes No
(10 people found this comment helpful, 1 did not)

Anonymous on 5/5/2005

WARNING!!
THIS PRODUCT WOULD BE AWESOME IF THEY PROVIDED ADDED INSTRUCTIONS AND PRODUCT FOR THE GUYS WHO ARENT SHORT AND STRAIGHT. THE PROVIDED CONTAINER WON'T WORK IF YOUR GUY IS THICK OR CURVED. YOU'LL HAVE TO GET ANOTHER CONTAINER, BUT BEWARE AS THERE IS A LIMITED AMOUNT OF PRODUCT FOR MAKING THE MOLD.
Was this comment helpful? Yes No
(10 people found this comment helpful, 1 did not)

Anonymous on 2/8/2005

AWESOME!! AWESOME!!! AWESOME!!!!
This is so great and it works awesome if you read the directions. I am ordering more to give to female friends!!!!
Was this comment helpful? Yes No
(3 people found this comment helpful, 2 did not)