Clone-A-Willy Kit

My boyfriend and I bought this because he is leaving to Afghanistan in a month. When we got the kit we had read some of the reviews about cutting off the closed end of the tube and pouring in the mix. We instead decided to do it the way the instructions say (fill the tube/insert penis). The instructions make you feel like you are rushed to get the mix in the tube so in our haste we did not think clearly and made a huge mess! We ended up spilling alot of the stuff on the floor so him mold was WAY shorter than him...also he had trouble staying hard (Which is something we did not even realize till after our mold was complete) I like my "cloned-willy" the detail (veins, etc) are amazing and if we would have done this correctly it would have been great! I recommend this but want to give a few tips: Do NOT hurry!!! The instructions give you 2 minutes to mix, pour, and insert...our mix was very runny so I suggest you let it thinken just a little before inerting your penis....This definitly needs two people! If you decide to do the mold according to the instructions make sure you are leaning over while inserting your penis into the mix or else you will have a HUGE mess! Have fun with it! We had a good time and even though it did not turn out perfect it is still him (just shorter, haha). Also, I saw some reviews where people are saying you cannot order more molding mix there is a website on the instructions where you can order more. (Sorry I don't have it, threw my instructions away and forgot to write down the site)

Let me start off by saying: Read the instructions a few times before you begin, and make sure you have everything close by for quick access, because everyone is right, this stuff DOES solidify fast! Some people mention cutting off both ends of the tube, so that's what we did, and i wish I hadn't! When you put the mixture into the tube, dont have your man lay down and put his willy in so you can pour the mixture into the top, do as the directions say, and have him insert his willy into a nearly mixture-full tube. No matter how hard he held it against his body laying down, it STILL dribbled out the crack at the bottom, and instantly bonded to our towels and his pubic hair! Its like rubber jelly and a little annoying to remove from terrycloth (downright impossible) if you let it dry! so use old rags or papertowels. ALSO, as fun as it still was, it's still hard for it to be a "turn on" so we had a little trouble with his willy staying the same size through the whole process. We ended up with a half-erect rendition when it was all over. I advise watching some porn while doing this project! I had fun doing it, and I don't think he minded being subjected to my experiment, but I wish I had one more kit so we could do it perfectly! I refused to throw away his half size willy-copy, because I swear, this stuff captures EVERY single pore of skin. It would capture a fingerprint! I kept thinking of all the cool stuff I could do with it other than the willy. haha! Its a great buy if you are looking for something fun to do with your hubby and you have a little patience!

We used this right before I left for deployment and it worked great. My wife felt like she still had a piece of me home.

My boyfriend and I bought this and used it not to long ago. Apparently he is part of the "4%" that this product mentions. He is somewhat large...a lil over 8 inches in length and roughly 6 inch girth...so for anyone with these measurements (give or take...or larger) this kit will cause issues. The tube itself was long enough and did not cause problems. However, the instructions say to slowly rotate the tube if any of your pecker is touching the inside wall. Due to his girth this was somewhat hard to do. He could not get it twisted enough to where at least a bit of his pecker was touching the sides of the inner part of the tube directly. We had bought two kits (two different colors) and this occured with both of the kits. Secondly, due to his length/girth...there was not enough rubber to fill the entire mold. We did the first kit and used the 5 inch vibrator that came with the kit. When we put as much of the rubber that we could inside, there was at least 2-3 inches or more that was empty on the top. We inserted the vibrator and it did not push the rubber high enough to fill the rest of the space. It probably filled about an inch or so but there was still more room that was not filled. We went and looked back on the instructions and it mentioned that if you have a larger pecker, to use a 7 inch vibrator instead of the 5 inch standard that came with the kit. So, we went out later that night to a toy shop...we found a 7 inch vibrator (roughly the same type/thinness of the one in the kit). We used the second kit along with the 7 inch vibrator that we bought. It still did not fill the rest of the empty space. It did help but there was still some empty space that did not get filled. If you happen to have a larger pecker similar to that of my boyfriends, I strongly reccomend buying the extra rubber for the kit or finding a very thin but long vibrator to help push the rubber into those empty spaces. Aside from that the kit is great. Be fast, use a stop watch or a timer when you are mixing the powder for the mold...it helped greatly. Two people is a must. Read the instructions a few times...and if you go to the clone a willy website there is a "how-to" video that is very useful as well...I stronly reccomend watching/reading everything prior to the first use.

This was fun to create and it comes in handy when wifey and I are feeling kinky....this was the only way to coax her into a DP. A little awkward to make while maintaning an erection, but we pulled it off. As was said before, FOLLOW THE INSTRUCTIONS!

Most important to shave ahead of time...or else have someone you trust with sissors afterward!! We used a plastic tablecloth on the floor to help with the mess, and make sure you have all your ingredients out, and read the instructions CAREFULLY ahead of time, not hard to do but must be quick to do well. Definately easier with someone to help. He kept himself hard while I did the mixing. A cock ring is a good idea. It takes 24 hours to be completely finished. If you have kids like us it is helpful to do it in stages: cut the plastic tube in advance, have to be erect to do this to know how long to cut the tube, and put on tape in one session and can finish in another session if needed. Also can be difficult to get an accurate length if you are fighting constantly to keep up the erection all the time. Cutting the sealed end makes good sense but we did not think of that. We got the water hotter than it said so we could work up the erection a little before dipping in the mold. Our biggest issue was he was touching the side of the tube. Good idea to check for that before it sets up. Because of this dildo is thin and the vibrator looks as if it may come out in the near future. If it does we will definately make another! Very life like...love it!!

This is a good product. It is tricky though. I read the reviews first, and that helped me. Be sure to put something down, that you can throw away, on the floor when you do this. It's very messy. Also, have someone help you stay hard. Either by touching or visual stimulation. If you use a coc*ring, it will come out in the mold. I used one. I think it made the clone look less realistic. When you mix the powder into the water, don't try to mix it very well(It's supposed to be lumpy). It takes too long and it gets hard very fast. I don't recommend waiting at all, before inserting your penis. Just do it quick and press it against your body to keep it from spilling out. Don't get discouraged after your first attempt. You can order more powder. It's really cheap for that stuff. The liquid rubber is the expensive part, so make sure you're happy with the mold before pouring the rubber.

This was alot of fun for me and my husband to use. It was easy and we even got a second one because of how much we enjoy using it and making it. A must have for anyone in a military relationship or anyone who just likes experamenting. My husband and I both really enjoy this one.

Right now my fiance and I live on opposite sides of the world. I had jokingly suggested this, because I honestly thought it would be incredibly sexy to get to masturbate with a clone of his penis, especially when he's on the phone while I'm doing it, or watching on webcam. I NEVER thought he'd go for it, and we were browsing other toys, sending links back and forth when he said, "You know, that WOULD be kind of cool..." So just before he came out for Christmas, I got a kit, and we gave it a shot. The only thing that sucked was that because his penis is long and thick, there wasn't enough molding goop to make a full casting. Oh, and for the sake of your guy? Risk losing some detail at the base and cover the base of his penis and pubic hair with cellophane. Otherwise, as he's taking himself out of the mold...SURPRISE! You just got waxed. I had enough forethought to avoid that mood killing situation. I have to tell you - there's nothing sexier than feeling "his" penis inside of me even when we're apart, and for him, well I think it's pretty hot for him to see "himself" penetrating both my front and back at the same time while doing it doggy style. Not for everyone, but DEFINITELY for us!

I highly recommend this product. Just take the time to read the directions, and read the ratings here and you'll come out with a perfect copy. I DO recommend not trying this alone, i did as a surprise for my wife and the mold set too fast, and its really hard to concentrate on mixing, pouring and staying hard at the same time. Other than that, try it, youll love it.