Verified Buyer

First time trying and had no issues at all. We cut the closed end and had him lie down with his penis in the tube, open ends on both sides. I then poured the casting liquid on top and he was able to stay comfortable and there was no issues at all! Tips: - Don't mix the casting too much, lumpy still works!! - work fast - cut the closed end off - make sure to rotate the tube if he's curvy to... ensure to get liquid all around Read more

Verified Buyer

This vibe was fun and easy to make. The glowing feature is great and actually works. My husband loves the thought that he is imortal now and that even when I am using it alone, It's still "him" I'm with. An exact replica all the way down to the skin texture. Two thumbs up.

Verified Buyer

I bought this to use with my wife, and we read the instructions and bought an extra packet of mold just in case. I read up on tips and reviews from others, and found several that were quite helpful. We made a quite accurate mold in spite of a slight curve. Biggest recommendation is do research and get tips prior to attempting. Do not try this going in blind as it would have been much more stressfu...l to attempt. Some things that went well: use a penis ring after you are hard. I believe this really did help keep him erect long enough for the solution to mold and solidify enough. timing and temperatures do appear to be critical. We followed these to a "T". I wrapped some saran wrap at the open end of the tube with a slit in it. This, I believe, helped keep more solution in the tube when inserting him into the tube. You do have at least several seconds to make small adjustments after insertion, ie to make sure he is centered. Try to minimize the movement after several seconds though to be safe. I actually had her help do the final temperature checks and mixing while I was taking her from behind. This is where the penis ring came in handy, as it helped delay me long enough for her to finish the mix. As soon as she poured it in the tube, she handed it to me and I inserted, (again, the penis ring delayed his shrinking) made a couple last second adjustments to position, and all in all, it came out quite accurate. We didn't have to use the second packet. So number one tip, use a penis ring, and read reviews to get tips for success! Overall we enjoyed the process thoroughly. The noise from the vibrator is a tad noisy, but she seems to enjoy it! Read more

Verified Buyer

I followed the instructions and it worked almost perfectly. The head of my penis touched the side of the tube so there is a small flat spot that isn’t very noticeable. It’s very hard to stay hard while mixing everything. I strongly recommend having help. I did it alone. I might order this product again to make my own custom design. If you think about it you really don’t need to make a clone of... your penis. You could clone anything in that size range. If you buy enough of the materials you could even clone bigger things like your fist. I think they should offer sales on all the materials sold separately and/or larger sized kits. Read more

Verified Buyer

Exact replica of my shaft. Wife loves it! A bit stiffer than expected but works great and lots of fun to make with loved one. Make sure she keeps you hard during curing process.

Verified Buyer

So my wife had always wanted me to do this, so I finally bought one and surprised her with it. Unfortunately for me I only went off pictures for instructions and didn't actually read. So my mold ended up glowing and not the dildo. But other than that. The wife loves it and I always think its fun to hear her use it or I use it on her.

Verified Buyer

Pros: The best part was the interaction with my hubby. We both had a lot of fun making it. I would definitely make another, ours turned out great!!!! Cons: You really have to time everything exactly. So make sure you plan ahead.

Verified Buyer

WATCH THE YOUTUBE VIDEO DEMONSTRATION! Makes it SO much simpler!

Verified Buyer

My husband and I had a blast making my new FAVORITE ?? play toy for when he’s on the road working. The whole process you have to be prepared, precise and quick but as long as you’ve read the directions thoroughly before hand your all good. The rest is welllll let’s just say hmmmm playtime ????. The hardest part of it all in my opinion was waiting for everything to set so I could finally see the re...sult. And when I did OH MY GOD!!! Every detail, every vein, the frenulum even… it really is a clone just without flesh and heat lol. I totally recommend this! I chose not to put the vibrator in mine just a personal choice and it’s still awesome ?? Read more

Verified Buyer

I really liked this product and we enjoyed making it. It really does do really good detail on it. It shows veins, and every detail. I would recommend this to any couple. Plus it glows really good to.

Verified Buyer

Had a good time making this together! :) Now when I’m gone, she can still have me...sort of. And it glows in the dark, BONUS!

Verified Buyer

Pros: It's awesome and lots of fun...diffently a 2 person project... it makes a very real reproduction Cons: A messy job

Verified Buyer

You definitely will need help with this. The detail of the final product was amazing. The glow is a lot better than I thought it would be. It glows bright. Try it, it's fun!

Verified Buyer

Me and my fiance wanted to try this, directions were easy to follow and besides the wait time for the mold and gel, it was fairly quick and simple. And when you have a beautiful woman to help it along makes it even more fun. Just pay attention to the directions and you should have no problems.

Verified Buyer

My husband and I order a couple products from a&e the clone-a-Willy being on of them. At first we were really excited about this but we got a defective item. I emailed customer service, not only were they attentive but kind as well and sent me another clone a Willy at no charge. The next one we got was perfect. The silicone was usable not dried up like the first one was. It comes with a vibrator t...o make your clone vibrate and what not, but I don't think I would ever use as a toy because the texture is off for me. Overall I would purchase again though, it was a fun project for the hubby and I and we both enjoyed ourselves and the time we had together. Read more

Verified Buyer

OK so lets start with a disclaimer. I read a lot of good and bad reviews and there is two common themes. First is the kit hardens too fast to pour it and second is that you should buy a refill set with it. Let me address the complaint. If you read the instructions you only stir for 45 seconds then it sets in two minutes. It appears most of these reviewers read it wrong. Second the hardest part is ...keeping it up full sail for the process. This is true- so two pieces of advice. Like a number of people suggested do buy a second refill set. Even knowing how to do it correctly we can now get the best result after doing the process once. And what's the harm in a second toy if you have one? Though our first attempt was not 100% it is an amazing replica, fully functional and very effective. And as many people suggested it's a lot of fun to do. Anyway once you get it right it's exactly as advertised and a great product. Read more

Verified Buyer

My wife and I made this a couple of days ago and it was fun making it. It was a big messy but fun , and it comes out looking great. This was our first one and we did a great job on it, the instructions are easy to read. It s worth a try for any couple out there!!!

Verified Buyer

My husband and I loved making this and the end product was really great the mold really works well and if allowed enough time to dry you can really see the detail of what your man's packing!!!! Definitely recommend this

Verified Buyer

so i did 1 of these for my girlfriend to take on her travel out if the country. so technically I'm kinda traveling too. she loves it and the pics spice it ul

Verified Buyer

If your getting the glow in the dark be sure to mix the silicon very well or the powder will sit at the head of the penis. Other then that I loved it. It felt amazing and I'm looking forward to having my man make another.

Verified Buyer

Pros: It was pretty easy to make. And the detail was very real! My girlfriend loved it. Cons: Not

Verified Buyer

So product is a 4 but the fun the wife and I had doing it makes it a 6. The mold dried oddly and cheated me out of about an inch of length. The girth and detail were perfect. This is a great adult arts and craft product.

Verified Buyer

Reviewer left no comment

Verified Buyer

Pros: the first one didn't turn out right, the next one cut the tube in half and split it the side. I took my size an extended it out another half inch, taped it and dropped it in the other tube. poured the solution let it get hard. let it sit for 8 hrs. then poured the latex material in let it set 48hrs. gave it to my girl friend

Verified Buyer

Pros: Read all the directions first. If you can be there with your man doing everything while all he focuses on is getting and staying hard. It worked out great for us. The dildo is so lifelike and we really enjoy having two! Cons: The vibrator kept bobbing up. It didnt stay down inside the silicone. Even when weighted down. Theres a spot that it comes all the way through the dildo because it ...kept coming up and going sideways. Wouldve been better not adding that. Read more

Verified Buyer

Pros: The vibe is pretty strong my gf loved it. Cons: Not really a con but make sure u follow directions to a t there is no room for error

Verified Buyer

my wife and i had a blast making this willy it actually is softer then the original clone a willy

Verified Buyer

This was a fun and easy dildo to make a bit messy but super easy to clean up . I gave the dildo to my girl as a gift and she loves it. PLus the glowing powder adds wonders to the dildo.

Verified Buyer

She loves it! It's nice that when I'm working late she has a piece of me around!

Verified Buyer

Pros: Just finished making mine. I now know what she means when she says "you're almost too damn big". The detail was precise. We can't wait to make another one to give as a gift Cons: Quite messy but very easy clean up on all fronts.

Verified Buyer

Pros: It was so easy to do, just read and carefully imitate the instructions. So fun for a couple to do. Cons: Honestly nothing!

Verified Buyer

Did this as a gift for my wife's birthday. Ended up getting a second one after I made the first. She loved the first so much, she made me make another. :) highly recommend this!!!

Verified Buyer

It was a fun project to make a specialized dildo for my partner, the instructional video that can be found online is informative and simple. My only complaint is that the instructions dont give a way to make a base for this toy. As many people know a wider base is pretty essential for sex toys. Luckily there was an easy how-to I found online that didnt require any additional products, just some cr...eative problem solving. Overall clone a willy is a solid product, and you can use the product fairly well and easily ?? Read more

Verified Buyer

This was so easy to do. If you can read you can clone~a~willy. The vibrator inside feels great. Now when hubby is off working 3rd shift he can still get me off everynight.

Verified Buyer

Feel like a porn star!! your man is eternally immortalized and it is just so cool!!

Verified Buyer

Pros: It's a fun couples activity and now we have a glow in the dark vibrating replica of my who-dilly Cons: A little expensive

Verified Buyer

My husband and I joked about making one of these. But when we started talking about toys and saw the Glow-in-the-Dark one we decided to give it a try! When we got our package in the mail the only thing missing was the glow powder. So I called the customer service number, and the representative promptly answered the call, asked a few verifying questions and had a replacement product mailed out prio...rity ASAP!! We are extremely happy with our product and can't wait to give it a try! The cloning process is time-sensitive but the directions are clear and specific. There's even a video on how to do it (with a banana as the sample lol). We look forward to cloning very soon now that we've got our glow powder!! Read more

Verified Buyer

Wrong color was sent. They sent the correct one free of charge without having to worry about returning the wrong product.

Verified Buyer

Pros: Once we figure the process out, and don't muff it up, it'll be great! My boyfriend goes away for army classes and training quite frequently, so this'll be handy ;) Cons: It's not as easy as it looks. I made the mistake of mixing the mold mixture for a couple seconds too long and when I went to "pour" it into the molding container, it was far too set to be used as a mold. Definitely pour i...t as soon as you have it mostly mixed, as it sets a LOT faster than expected. I haven't got past that point, so I'm of no help past that ? Poor boyfriend, he puts his d in such strange situations for me ?? Read more

Verified Buyer

When it came in the mail my wife an I were very excited to get started. After reading the easy to follow instructions. We got started an after the 24 hours to let it set. I can tell you we had a very fun day.

Verified Buyer

The clone-a-willy was easy and fun to make and has been very fun to use. On me and my wife. Plan to have many hours of fun filled and orgasm filled times with it. The clone came out identical to me.

Verified Buyer

I gave this to my boyfriend for his birthday. We had so much fun making the willy and continue to have fun with it. We are going to get another because he says he can make a better one!!!! Great gift.

Verified Buyer

Pros: Easy to use, detailed dildo :) would definitely be easier with a partner helping you and keeping you turned on during the molding process

Verified Buyer

Pros: We enjoy it Cons: Need extra pack

Verified Buyer

Was fun and easy to use! Instructions were very clear:)

Verified Buyer

Pros: It was fun to get ready and make this with my husband! Cons: A little messy but what fun isn't? Husband said it would have been nice for the mild to be warmer lol

Verified Buyer

Pros: My wife enjoyed it a lot Cons: Afraid that the rubber coating will rub off

Verified Buyer

Reviewer left no comment

Verified Buyer

Makes her wet just like I do

Verified Buyer

Reviewer left no comment

Verified Buyer

Pros: Just.... Read the directions... Worked great

Verified Buyer

Pros: If product worms correctly will make perfect replica Cons: Very difficult or get the mild to set up right , ruined the last one I did

Verified Buyer

Pros: Wife loves it Cons: Vibe not very strong!

Verified Buyer

Pros: Realness in look and real feel. Cons: Complicated instructions

Verified Buyer

Pros: This was really fun to make, and super easy. I love having a replica of my husband to use while he is gone to work. Cons: The only thing I didn't like was waiting for it to set up because I was so excited!! But sooo worth the wait :)

Verified Buyer

Pros: Fun to make Cons: Can be a little difficult everything has to be done quick

Verified Buyer

Pros: This is the coolest thing ever.

Verified Buyer

Reviewer left no comment

Verified Buyer

Happy to have my hubby's sexxxy replica i used a throw away spatchula and we had fun ( but dont care for tacky dvd it was a bit much for instructions

Verified Buyer

Pros: Hardens fast Glows in the dark Easy to use Fun Cons: Hardens fast Messy

Verified Buyer

It was easy to do, thanks to the YouTube video. it also glows very brightly! My wife loved it!

Verified Buyer

Cons: The cast sets very quickly.

Verified Buyer

Reviewer left no comment

Verified Buyer

Reviewer left no comment

Verified Buyer

We had fun with the whole experience from making it to using it ??

Verified Buyer

Pros: Fun to do with the man, captures every vein and skin crease. Cons: The vibrater is pretty cheap, I wish it had multiple speeds.

Verified Buyer

Purchased product before. Fantastic

Verified Buyer

great fun

Verified Buyer

Pros: Easy Cons: Messy

Verified Buyer

Reviewer left no comment

Verified Buyer

Pros: My husband is gone for a while and now I always have him at home with me! Was the best idea ever!

Verified Buyer

Pros: Was easy to make ! Worked just like the book said ! Cons: None

Verified Buyer

So much fun to make! Sexy good time! Make sure you have help 2 or more are a must! End result is amazing, perfect detail!

Verified Buyer

Pros: Very easy to set up and make mold. Glow in the dark is a great addition, and is very bright once charged for a few minutes under a lamp Cons: Vibrating insert not quite as strong as some of the other vibrators we have used.

Verified Buyer

Pros: The glow in the dark part Cons: The missus would like the rubber compound to be a bit softer in the final product

Verified Buyer

Reviewer left no comment

Verified Buyer

Pros: Great Cons: The mold sets very fast

Verified Buyer

Pros: Awesome product Cons: I wish it had a stronger vibrator

Verified Buyer

Reviewer left no comment

Verified Buyer

Had a fantastic time making this with my partner. Easy to follow instructions. Worth every penny!!!

Verified Buyer

came out great !!

Verified Buyer

Reviewer left no comment

Verified Buyer

Amazing. Get one ot two! 1 with vibrator one without. You will not regret it!!! Super easy to do and a fun time.

Verified Buyer

Super fun to do with your special someone had a great time and many more are to cum...

Verified Buyer

Worked perfectly the first time, and is an exact mirror image. Great product

Verified Buyer

Reviewer left no comment

Verified Buyer

We have the original one that we made before my friend left for Ukraine… had so much fun making it purchased the glow in the dark for his return…the experience of making it is actually a little more fun !

Verified Buyer

My wife and I had so much fun making this. We did mess up the first tiem and the first part hardened too fast. I would recommend watching a video tutorial and making sure the water is not too hot. The mold is awesome! It is very realistic and the glow in the dark is really cool. Fun to do and my wife says the toy feels like me. We may make another one.

Verified Buyer

Reviewer left no comment

Verified Buyer

My boyfriend purchased this for my birthday. It was a great gift and we had fun doing it together

Verified Buyer

Reviewer left no comment

Verified Buyer

Reviewer left no comment

Verified Buyer

Me and my boyfriend had a ton of fun with this! This is the second one I bought, the first one we weren't prepared for what goes into making it lol. So if your going to do this, do the prep work FIRST have everything ready to mix then pour quickly. The second time around we were both prepared and it turned out wonderful. We cut the top off the tube so he could lay down as we did it, i put electric...al tape around the bottom of the tube for a better seal. This worked great! Side note, if you have a curved penis you DON'T need extra molding power, just turn the tube so it gets the wonderful angle. Read more

Verified Buyer

This kit worked great but we messed the first mold up. This molding powder was hard as a rock before 2 minutes. Just hurry with the mixing and get your it in fast. On the second try it worked great and came out very detailed! Girlfriend loves it!

Verified Buyer

mix well and move fast looks just like me my wife loves it she has me all the time now

Verified Buyer

My fiancé just loved this item.Its the identical version of me.... She said It’s one of the best gifts ever received

Verified Buyer

Reviewer left no comment

Verified Buyer

Really good when hubby is away

Verified Buyer

Reviewer left no comment

Verified Buyer

Reviewer left no comment

Verified Buyer

Reviewer left no comment

Verified Buyer

Cons: Took along time to set up and actually use the mold

Verified Buyer

Simple to do. We had a great time making it together. She absolutely loves it

Verified Buyer

Pros: it works pretty well Cons: it dry'skin to quick I had to buy a second kit

Verified Buyer

n/a

Verified Buyer

n/a

Verified Buyer

My wife and I had a lot of fun making this. Now she has a part of me while I'm gone away from home

Verified Buyer

Pros: Was really really fun to do it came out great Cons: Wish you just reorder the molding part and not the whole thing

Verified Buyer

Pros: Very fun for couples

Verified Buyer

this was worth every penny!!! (and the extra for the extra mold material)...it was messy and you need your hunny to help...first try was a bust...second was ok...third time was the charm with a perfect exact clone...it was creepy how exact it is!!! love it so much got another none glow in the dark one...the glow in the dark powder makes it rock hard unlike the one with out which is more jiggly...... GET EXTRA MOLD POWDER!!! Read more

Verified Buyer

This thing is a hoot, but it is no small undertaking to do it right. Some people can probably do it alone, but staying erect while performing the necessary preparations isn't easy. Well, chances are your helper is going to laugh her/his ass off when you're standing there holding the tube to your groin while waiting for the gel to set, and if a camera is nearby, I can almost guarantee you'll be p...hotographed. If YOU saw someone standing there fighting to stay hard while violating a tube of seaweed powder, would you leave them alone? So unless you want some really weird shots to show the grandkids, HIDE ALL CAMERAS! Even with some planning and preparation, mine didn't turn out as well as I'd hoped. I'm unusually short and thick though, and slightly bent, but even then it's a pretty good copy. But even if it wasn't, the fun of making it and the anticipation of seeing how it turned out is worth the money. I thought the rubber would be a bit softer. It's actually pretty stiff stuff, even without the hard plastic vibrator inside it I don't think I'd be able to bend it as much as the real thing. The texture of the skin is preserved, but it won't have the give and softness the real things has. It's no jelly dong! Even if it doesn't turn out perfect, you'll get your money's worth just from the attempt, and you'll get a heck of a souvenir! Read more

Verified Buyer

I ordered this product to have some fun with my fiancee as it seemed it would be entertaining for the both of us. Problem is though we followed the directions thoroughly the molding compound set much faster than it stated in the instructions. We were unable to get "me" into it as it was just too solid. I then decided to order an extra bag of the molding from the manufacturer directly. When I rece...ived it, there were instructions stating the temperature of the water should be reduced to 90 degrees F, reading that I followed that temperature and mixed the mold for a slightly shorter time and it actually worked very well. We let the mold set for 2 1/2 hours and mixed the silicone and glow in the dark powder filling the mold and letting it set for 24 hours. After the 24 hours we pulled it out and were astounded with how well it came out! It truly did capture every vein and divot of my penis. We decided not to put in the vibrator that came with the kit so my fiancee could practice deepthroating and she loves our new toy and we had some "double fun". All in all it was definitely worth it once it worked. To anyone thinking about getting the clone a willy kit, I highly recommend saying yes and just shorten the mixing time for the white molding powder. P.s. the glow in the dark powder did not make the toy green, it stays pink till the lights are off which is pretty cool! And word of warning, do this over a solid floor like wood or tile or use something disposable underneath you. This product is EXTREMELY MESSY... but fun! Read more

Verified Buyer

it was pretty easy to do overall, but not all things needed to make to the copy were included. example: scissors, duct tape, mixing bowl/cup ect. if your guy is a lil bent, make sure to cut the tube properly as it instucts in the directions. the end product was great except for where his member touched the side of the tube. only downfalls are you have to make sure he's ready when the mix is being ...made and you have to wait 24 hours before actually using the end product. tons of fun!!! Read more

Verified Buyer

We thought the item is great however I would suggest purchasing two. I think that getting used to the two minuet time frame and air bubbles in the gel are the trickiest things. I think that the second time you will have a perfect replica. We were really pleased with the detail it is extremely life like.

Verified Buyer

I bought this as kind of a joke for my girlfriend, but surprisingly it works great, and it was really fun to make, although it was a bit messy.

Verified Buyer

After reading all the bad reviews, my wife and I were certainly intimidated. But she loves (really craves) me so I wanted to give her a "me" she could enjoy while I was at work or running errands. We were sure to get everything out ahead of time, reading all the steps so that we didn't miss anything. 1) it's going to be messy. 2) take your time. 3) if you make your pancakes wrong, you'll want t...o try less making the mold. 4) having a partner keep you "at the ready" is definitely helpful. 5) when it says be in the mold by 2 minutes, it means from when you pour the water, not from when you start mixing and definitely not from when you pour the mix into the mold. 6) after the mold has cured, take your time to make Sure the vibe isn't touching the sides. Shim your cardboard if you need to. 7) agitate the silicone to avoid bubbles. and lastly) the silicone is less flexible than we expected. Read more

Verified Buyer

We had a lot of fun with it, even with the messiness. The only downfall I can find is that you have to work very, very quickly.

Verified Buyer

This is a fun gift for any couple. Highly recommended. Extremely close to real life. Would recommend a dry run through as it is fast paced and a couple helping hands (or mouth) ;) is highly recommended.

Verified Buyer

Cool thing to do with ur partner and easy to do if you follow the directions closely but the silicon is very hard more of a novelty item then an actual toy but still pretty cool

Verified Buyer

Use hotter water then remanded helps

Verified Buyer

Pros: worked great and feels good Cons: Had air bubbles and a few non slong related blemishes

Verified Buyer

well i thought the product was awesome. i never expected for it to really come out loooking like the rea thing.was very pleased.

Verified Buyer

i got this to have a little fun between me and my husband. i thought it would be fun for both of us. it is something unexpected and the men will love it. also it is a good idea to suprise you loved ones with and a joke or a simble of love. you decide. i love it and i am going to do another one for my mother as a joke because she thinks my husband is hot. i have an odd relationship between my mothe...r and i. dont ask. recomended highly!!!! Read more

Verified Buyer

it was a lot of fun and the details on it are great the only thing i didnt like was the smell of the resulting replica but other than that its great : )

Verified Buyer

Fun to do with your SO but we had a little spill over when it tells you to fill it full then insert. We did the exact instructions and the mold liquid spilled out so i wouldn't fill it FULL. But totally worth it!

Verified Buyer

This was a lot of fun. I did not think my husband was gonna go for it but he was really interested to see how it would turn out. All of the videos that show you how to do it used an object that was not attached to a person's body so the hardest part was getting him into the tube without the pancake batter thick mold not just pouring out. Buy an extra pack of mold so you can do a redo but ours stil...l tured out pretty well. We were amazed by the whole thing lol. Read more

Verified Buyer

My wife really liked the fact that she could have TWO of me at once. Even better, I can experience the pleasure she gets when she's not around. I guess you can say I can go f%#k myself!

Verified Buyer

A little messy, but a lot of fun. Not the easiest thing to do the first time, but I'm sure the second will be better.

Verified Buyer

Over all it was a good product, was not enough silicone to produce the full length but the wife was satisfied and we had fun making it.

Verified Buyer

Messy, but fast and easy clean up. Fast process, and easy to do. A smaller vibe would be nice, and leave an overall more realistic product. Mold takes well and makes a quality replica, veins and all. Vibrator is loud, but certainly vibrates.

Verified Buyer

Preparation is key. Make sure you read the instructions and have everything prepped and ready to go. Overall it was a cool gift I got for my wife. She thinks it’s awesome.

Verified Buyer

Although this product is great, casting the mold is pretty difficult. Once the mold has hardened removing your penis from the mold can be a bit tricky. Once you pour the silicone and actually clone your penis any imperfections in the cast like air bubbles will show up on the clone and could be uncomfortable unless shaved down with some sort of sharp object. Overall it’s a great product and th...e detail is very good. I would definitely buy another just to try it all over again. Read more

Verified Buyer

This is a fun gift or activity to do. I did mine with my wife. We could have used a little more silicon mix in order to fill up the mold all the way, but it turned out great none the less. The vibrating component of the product is very loud, but works well.

Verified Buyer

It's cool my wife can have my willy when I'm not home. It is very hard to stay hard for 25mins and not moving. But if you follow directions and can stay hard it is a great product. I didn't use the viberator in my willy either and still worked.

Verified Buyer

Love this product!

Verified Buyer

Overall very happy with it. I have 2 gripes though. I think it could use a bit more molding powder, one bag wasnt enough to fully cast my willy even though I followed instructions exactly. Ended up needing to get two bags and re-doing the casting (larger willy so maybe that's why). The end product shows great detail but there is no flexibility and it doesnt glide very well over skin, even with... silicon based lube. Read more

Verified Buyer

Follow the instructions EXACTLY!!! We had to order new molding powder because I went 7 seconds over the stirring time. I also think the tube needs to be bigger. It says not to touch any of the edges but the proved difficult with the molding in there. But other than that, it’s great!

Verified Buyer

This is a funny and exciting way to share time with your partner.

Verified Buyer

Pros: Molds a pretty acurate shape and is a fun process Cons: the resulting dildo is kinda stiff and the texture isn't the greatest

Verified Buyer

Great product worked fine just needed more mold to fill tube.

Verified Buyer

Im torn with my review of this item.. because on one hand it did exactly what it said it did it cloned his willy but on the other hand you have to be fast about it and it was fun but very nerve racking because it cost so much so you dont want to mess it up... But it was a fun thing to do with my Husband.

Verified Buyer

Take your time, do not rush anything and itll be just like the one you cloned

Verified Buyer

Pros: My wife was way more into the whole event than I expected. We had a blast making this dildo. I haven't laughed so hard. Product works well, and is just fun to do as a couple. Cons: Don't hesitate, after you mix the mold material, pour it in the tube and shove in your manhood, because if you wait, it's not going in at all and you have to go buy more material.

Verified Buyer

Pros: Fun to do with your partner and a great way to have him any time and any where!! Cons: One shot at making it.

Verified Buyer

Reviewer left no comment

Verified Buyer

Reviewer left no comment

Verified Buyer

Pros: I can have his package even he's not home Cons: Kind of hard to do

Verified Buyer

Reviewer left no comment

Verified Buyer

Pros: I made my clone with my SO and it was a hilarious and awesome bonding occasion. She has also gotten use out of the final product and says it's very good. Cons: There are few things less erotic than jamming your penis into a tube of molding paste and trying to stay hard long enough for it to set.

Verified Buyer

Reviewer left no comment

Verified Buyer

Pros: So realistic, vibration, great quality Cons: Not enough mix

Verified Buyer

Reviewer left no comment

Verified Buyer

Reviewer left no comment

Verified Buyer

Cons: Could not get the timing right, so never made it.

Verified Buyer

I want to preface: I love this product, because it’s a great way to make a very detailed copy of your (or your partners) phallus. My only problem with it is one of the parts of silicone (not sure if it was the catalyst or the base) was spilled and actively spilling out of the plastic jar, so I had less to work with.

Verified Buyer

Follow the directions to a “T” and it will work great. We bought a blue glow in the dark one off another site as well. The first mold didn’t set up right and two minutes wasn’t long enough so the second time we left the mold on my penis for like 4 minutes and the mold was perfect. So when molding leave it on for as long as possible. we decided to do the blue color first and it turned out as an exa...ct replica of my penis with the vibrator perfectly in the center. The second one the vibrator was off center and could be seen but would still would work as a fine dildo. So overall. The vibration is pretty good and it was a fun project for my wife and I. They definitely glow in the dark. when your molding make sure to do it over a box or trash bag because it will overflow and make a mess but that’s part of the mold process. Have fun Read more

Verified Buyer

Reviewer left no comment

Verified Buyer

Reviewer left no comment

Verified Buyer

Reviewer left no comment

Verified Buyer

Pros: It was a lot of fun to do together! Makes for a special night activity. Cons: Doesn't inform you all of the items you need to make it

Verified Buyer

Pros: so fun to do with a partner and the molding captures so much detail. Cons: can get a little bit messy. lol no big deal though.

Verified Buyer

I like it even though my partner is bigger than most.

Verified Buyer

Doing another this one came out good just didn't keep a 100% hard on two minutes but will the next one lol still works great just lost 1 1/2inches from hard to half mass

Verified Buyer

It worked, pretty good copy of my little friend. The rubber is a little harder then we thought it would be but fun none the less.

Verified Buyer

Reviewer left no comment

Verified Buyer

Read and follow all directions carefully and it will make a great clone of your member! It will light up a dark room as well.

Verified Buyer

Cons: Should've bought an extra mixing pack.

Verified Buyer

Reviewer left no comment

Verified Buyer

Reviewer left no comment

Verified Buyer

Pros: Great novelty for girlfriend Cons: very difficult to do alone

Verified Buyer

Pros: How fun it is to use and make this product Cons: It's kinda messy and not enough silicon

Verified Buyer

Reviewer left no comment

Verified Buyer

Loves the fact that I don't have to be home when she'd in the mood

Verified Buyer

Reviewer left no comment

Verified Buyer

Pros: fun and easy Cons: porous so it collects dirt

Verified Buyer

Pros: Hard to make Cons: Hard to make

Verified Buyer

Creative

Verified Buyer

perfectreplica

Verified Buyer

Pros: She liked the end product. Cons: The process of making it.

Verified Buyer

Reviewer left no comment

Verified Buyer

If you've never done this before, go ahead and buy 2. You WILL screw it up the first go around. Maybe just get a molding powder reload. But you will definitely need a partner to do the mixing while you keep yourself hard. The mold mix sets up FAST. It's a lot of pressure in a small time frame to make the mold yourself. Also, look at reviews and find what technique works for you. I found cuttin...g out the bottom and pouring the mix in when you're already inside works great. Just get a piece of cardboard to cover it and tape it down after you pull out. The second mold we made was good, but the directions say to mix the silicone for several minutes. NO! Mix quickly pour quickly. The silicone started curing before I poured it and totally screwed it up. So the THIRD time around we were basically pros. Perfect mold, perfect cast. After all the time, frustration, and ordering new materials, we finally got a perfect clone. At least 99% accurate. Down to the veins and texture. We very much enjoy it. I would recommend that if you have any issues to contact the manufacturer. I asked them about the mold and the silicone and explained what happened and they shipped me a brand new kit with extra molding powder for FREE. Got it in 2-3 days. I highly commend the company in customer satisfaction. So overall great product. Even though the process was quite the journey. It was stressful, fun, then frustrating, and finally fantastic. My clone is glorious in the dark or not. So much in fact my wife light weight wants to share for others to see. But it stays between her and me ???? Read more

Verified Buyer

This is an awesome art project. The only negative this I can say is, the molding mix hardens way faster than the said 2 minutes. I had to repurchase some molding powder. 2nd time was the charm!! ;-)

Verified Buyer

I would have rated this five stars if it were easier to do on your own. I ended up having to get a second packet of the molding powder because it is so difficult when you don't yet know what you are doing. The second time I had success. And it works. It really made an exact copy of my penis. Now I can dp my wife by myself...

Verified Buyer

My wife and I made it and now we can DP without having a third party member

Verified Buyer

This product is well packaged, easy to use and works well. Comes with an instructional video to make it fool proof. very good product

Verified Buyer

This was a fun experience to make with my girlfriend it was a bit messy but easy to clean the instructions tell you everything you need to know the only hard thing is to keep my willy from touching the side but after the mold set and the silcone was done we pulled it out and bam it was perfect!!

Verified Buyer

I love the concept and since my boyfriend does have th sleeve the perfect penis I'm glad I. An. Lone and use it

Verified Buyer

Pros: My wife was way more into the whole event than I expected. We had a blast making this dildo. I haven't laughed so hard. Product works well, and is just fun to do as a couple. Cons: Don't hesitate, after you mix the mold material, pour it in the tube and shove in your manhood, because if you wait, it's not going in at all and you have to go buy more material.

Verified Buyer

Pros: It turned out identical to my husbands penis! Cons: There's no safe way to not make a mess everywhere!

Verified Buyer

I love the concept and since my boyfriend does have th sleeve the perfect penis I'm glad I. An. Lone and use it

Verified Buyer

Reviewer left no comment

Verified Buyer

It was easy to make, but i noticed after it was done there are a lot of bubbles and holes in the silicone.

Verified Buyer

there was not enough to make a clone it was about an 1.5 in short in the mold so if you are over 8in long u need to get 2 kits but the GF still likes to use it

Verified Buyer

My girlfriend and I were so excited about making a copy of my penis. We have been in a long distance relationship for over a year and I just loved the idea of her having my penis, even if I was not there. We prepared the product just like the instructions stated, however I did not read the statement about having a curved penis until right before we put the mold in the tube. Once I inserted my erec...tion into the tube, the head of my penis pressed against the side of the tube and I could not get it to work. We just ended up laughing it off and throwing it away. Read more

Verified Buyer

Didn't get to make it the molding mix solidified to quick before I got my willy in there to make the mold my mistake I believe the water was to warm

Verified Buyer

It’s not a one size fits all... we did not have enough goo to complete my clone... If you are a large man ... need to purchase 2 ...

Verified Buyer

You need to make sure you have an erection and that you can keep it while mixing the moulding powder. I find that it set way too fast, so it didn’t work for me.

Verified Buyer

you only get one shot at it - you have to get it right the first time - if you mess up any step you’re screwed. The directions are a little confusing - we both had to reread them a few times. The molding had a small air bubble inside the tube (which we couldn’t see) and when we poured the silicone in that bubble caused the entire head to get messed up. We were able to salvage it but I eventually w...ant to get a new one and try again it; it’s just a very expensive mistake. We still use this and we had fun with it, from a girls point a view the vibrator is one-speed nothing special...but the special part is that it’s you’re favorite weiner that vibrates! It’s pretty good at getting all the little details too lol. TIP TO AVOID AIR BUBBLES::Pour slowly and at an angle, like pouring beer in a glass. Read more

Verified Buyer

Boyfriend cut excess off before making the mold not thinking he would fit with the mold liquid. We went ahead and made the dildo to see how it would turn out and we are definitely going to try it again!! It’s a lot of fun to do as a couple and it’s gonna be great when we can do it the right way and I have a piece of my boyfriend when he’s not around!

Verified Buyer

Painstaking process. Requires your complete attention. Result came out looking pretty good, however, wish I would have tested the vibe to see if it worked before making my "monster". Now have a glow in the dark paper weight cuz it ain't worth sh--. My wife is extremely upset with end result and quality.

Verified Buyer

Unfortunately the molding plaster set up too fast so I haven't been able to use the product.

Verified Buyer

I got this as a birthday gift for my girlfriend. She likes it a lot but the vibrator is not very good. I would recommend putting your own vibrator into the mold instead. It is also very hard so it may hurt more than pleasure.

Verified Buyer

Have had 2 fails already. Buying new molding powder again. Follow instructions and still havent worked for me yet. Going to give up if this next one doesnt turn out.

Verified Buyer

I bought this a a gift for my girlfriend. So when trying to make it I failed miserably. It's not easy to measure out the ingredients, mix and pour them all while maintaining an erection.

Verified Buyer

The mold never set entirely. And if you are well off, it isn't sized correctly. Never got to make the final product but it was exciting to try and the activity that followed definitely has some added enthusiasm on both sides. Fun experiment but not satisfied with the product.

Verified Buyer

Pros: Having a glow in the dark clone of your junk is awesome for your partner or yourself. Also the final results make you feel like a star or someone who is worth making a clone after. Cons: Tour partner might like the clone better considering it is always ready and is easier to conseal. Plus it glows in the dark. The vibe could have been better if it was multi speed.

Verified Buyer

When I bought this, I was not expecting what I got. You have to create everything your self and also find some tools at home. Like cardboard, tape, scissors nothing to crazy. When creating the mold it he water has to be at exactly 90 degrees. Our thermometer came broken. (No ones fault) I thought I could still do it. No I could not. The mold solidified instantly. So follow the instructions to the ...T. The vibrator it brings works prefect! But non the less, it is being replaced. Adam and Eve does an amazing job of making the process super easy. But definitely would recommend Read more

Verified Buyer

We ordered the glow in the dark. When package arrived the glow in dark powder was missing. Called the company and they sent the powder along with a extra bag of molding powder. Thankful for extra bag of molding power. First time we tried it dried before a minute was up and you're supposed to take a minute to mix it. Second time we got the mold made, but the finished willy isn't a exact clone, it d...oesn't really have the real like features. Read more

Verified Buyer

Difficult to do

Verified Buyer

The silicone didnt want to dry the way the video and the instructions said it would. Had alot of problems with this product.

Verified Buyer

Pros: Seems like a fun way to connect with your better half. Cons: Messy and hard to get placement at first .

Verified Buyer

Fun to make I think 2 people will be better help but all around fun toy for couples.

Verified Buyer

Difficulty is high, look at videos first for tips

Verified Buyer

Pros: Fun to get made. Good couples time. Cons: The wife says it's too hard and hurts. She had friends that say the same. So now we never use it. Wasted $50.

Verified Buyer

Hard to use, very messy lol

Verified Buyer

I give it 3 stars because we did have fun making it. As for later use, i just couldn't get past the smell of the rubber.

Verified Buyer

We made our clone 24 hours ago and upon opening the mold the replica looks great! However the material does not seem to have set right because it is rough feeling and as you rub it material flakes off. I did not add the vibe but I wish it had some ability to add a handle, I wrote the company to ask if something was wrong with ours, depending on what they say we may have to try again. On a side not...e do not put your member in the mold while standing over a towel or carpet it will never come out! It cleans up very easily off hard wood or linoleum, when it stared to drip out my husband freaked and ruined one of my shirts. As long as you read the directions thoroughly a couple time and make good plans it is fun and easy to do! we broke it up into a couple days, measured, cut and adjusted tube one day then made the mold another. Read more

Verified Buyer

Pros: It looks just like his penis, vibration is amazing. Cons: Very messy, the dildo material peels apart, cheap products and materials.

Verified Buyer

Great detail down to every little vein you have on your "member". Haha had a blast making it with my girl. I recommend having someone do all the mixing and whatnot for you while your keepin it up. The only thing wrong for us was the ruber is very hard

Verified Buyer

My husband and I have tried this 2 times and the mold is not easy to get at all! It's very messy as well. We followed directions to a T. I think the problem is trying to hold it to your d*** and all the product wasnts to move down leaving openings on the side or tip.. yes we tried to move and reposition it but it didn't work either time it's not as easy as it looks and u have to be working fast. W...e watched the video they suggested but they didn't do anything different than us. I didn't use the vibrator part or had no interest in adding it Read more

Verified Buyer

Although we have to try it again first didn't do to well but the detail is amazing and complaint all 3 DVDs I received would not work there damaged

Verified Buyer

Wish the molding rubber would not get solid so fast.

Verified Buyer

The instructions were very very particular and specific which made it pretty complicated to make. I also discovered too late that I did not have enough of the white tube filler as I underestimated the amount I would need for my boyfriend's penis that I was cloning. Overall, it came out pretty well but I was only able to clone about half of it with the amount of filler I had. Came out super realist...ic and the glow is very cool so I'm somewhat pleased with the outcome! Read more

Verified Buyer

????

Verified Buyer

Cons: It was messy making it

Verified Buyer

Definitely fun to do with your partner, we got lots of laughs out of it, but thats about it. like other reviews its definitely a pain to get right the first time. Buy a back up pack of the filling ??

Verified Buyer

Pros: Okay, so this is a great idea in theory, though if you mess up there is no going back. The instructions need to be a bit more strict on your 10 second time limit. Cons: The second we filled the mold mixture into the tube it hardened with no chance of completing the process or restarting. Now, we aren't sure what to do with the final materials for the product.

Verified Buyer

The directions that came with the product are not exactly the same as the video instructions on the page. With the amount of customers who have had the same issues, you would think they would take steps to rectify this. But then there is profit to be made by selling the moulding powder separately. Follow the instructions on the video exactly. Once the powder hits the water 2min timer starts - no...t after the mix is ready as the paper instructions imply. If done correctly, the product is decent. Minus 2 stars for conflicting instructions. Read more

Verified Buyer

Pros: awesome idea and a trip to see the mold complete. Cons: Maybe should be limited you someone younger;) keeping it hard when all alone while sticking it in a hardening tube was a tad tricky, didn't want a mini me replica. Maybe have a partner do the cooking and mixing while you prepare for your moment of clone. Took a couple tries and turned out kinda ok.

Verified Buyer

Cons: Did not come with enough product, so was short 3 inches.

Verified Buyer

Pros: Great for gifts or gag gifts. Cons: The process to make the damn thing.

Verified Buyer

Wasn't hard to do but I'm not a chemist

Verified Buyer

Pros: It glows really well, vibrator is good. Cons: It's very firm molding, can kinda hurt if used improperly.

Verified Buyer

Its a cool concept, but didnt quite work. We followed the directions but it came out lumpy and with little detail. It wasnt really worth keeping so we just kept the vibrator part

Verified Buyer

Pros: It was a lot of fun starting the process with my girlfriend. And the vibrator is nice Cons: We got a busted tube and half of the silicone was hardened already

Verified Buyer

The kit does not supply enough material to fill an 8” penis mold. Instead it supplies enough for about 5-6” penis leaving a lot to be desired with the final product.

Verified Buyer

Pros: Great idea but... Cons: Very difficult to do. Even went to the manufacturer and bought two new molding powder pack. Still no successful. Definitely a two person job. Do not attempt to do on your own. This makes it hard for it to be a surprise for the girlfriend. Not like you can ask yer buddy to help. :-)

Verified Buyer

The molding powder dries way to fast practcly dries as your mixing it leaving no time to insert Mr. Happy

Verified Buyer

love the concept and had all the items worked properly, would have been fantastic. Vibe didnt work at all, and the molding didnt work as the instructions said it would. I decided I wanted a refund

Verified Buyer

Pros: Fun to make Cons: Material when dried is too hard.

Verified Buyer

Kit didn’t include some pieces such as a thermometer or mixing stick as stated they were supposed to be included in the kit

Verified Buyer

Pros: It was fun to try to make it Cons: It didn't work. The silicone had bubbles in it which resulted in little holes all around it.

Verified Buyer

it's a bit difficult to mold specially never done before ...maybe will be better the swcond time

Verified Buyer

Was my second time buying one because I messed up the first one pretty bad

Verified Buyer

Pros: Would have been very fun to foo if it didn't come to me destroyed. Cons: The package was broken and the molding power was everywhere. I wasn't able to use it so I wasted the money.

Verified Buyer

Reviewer left no comment

Verified Buyer

Reviewer left no comment

Verified Buyer

Pros: Great concept. Vibrator adds a little extra oh. Cons: 2 minutes before molding compound sets up is really stretching it. I'd say 1.5 minutes tops. Was not able to complete but we had fun trying and will purchase again for another try.

Verified Buyer

Reviewer left no comment

Verified Buyer

This is certainly a two person project. The directions seem straight forward but it is certainly not. It takes about a solid 36 hours from start to finish to make it.

Verified Buyer

Pros: After two failed attempts I got one good dildo. Cons: Easy to mess up the mix.

Verified Buyer

Getting this to work is next to impossible and it was messy.

Verified Buyer

Cons: Messy and the mold didn't work Now I need to get some more mold making material and try again. It didn't mix well, and I followed the directions exactly, including the temperature of the water. The mold fell apart.

Verified Buyer

Pros: It was fun to try to make it Cons: It didn't work. The silicone had bubbles in it which resulted in little holes all around it.

Verified Buyer

the mold sets too quick and its a pain in the butt to hurry up and put it on him

Verified Buyer

The distractions were not clear. Watched the video for more clarity and it just did not work out.

Verified Buyer

This is only made for men with an average or smaller penis. I bought it for my husband and it doesn’t even come close to fitting. Waste of money

Verified Buyer

Oh my god... I wish there was negative stars! The gel that your supposed to fill the tube with didn't come with enough to fill it.. tube was barely wide enough. .. made a f&$&&($ mess! By the time you get the powder mixed its already setting and then once its supposed to be drying the the gel leaks water so I had to poke holes... then 8 hours later when its supposed to be finished what you get is ...a knobby piece of crap that has cottage cheese in it that looks like an std ridden penis with jungle rot Read more

Verified Buyer

We read directions, used a timer, rushed and it didnt work! Wasnt to fun either aggravated both of us. We are going to try again even faster than last time( the company that makes these sells just the molding powder if you fail)

Verified Buyer

Pros: I could not tell you it never showed up. Cons: It's pretty funny the product never shows up and you want me to do a survey so everyone can read about it. LOL Great Marketing strategy!!

Verified Buyer

The molding powder sets in about 20 seconds making it useless

Verified Buyer

Waste of money & waste of time. Biggest mess. If you wanna have your husband frustrated trying to stay hard while trying to do this, great. We followed instructions, timed it super fast and it looked like soggy grits that were HARD. Couldn’t stick his penis in unless he shoved it so hard and it barely went in because the stuff was so stiff. It barely dried after 2 days and had water leaking to t...he bottom. We tried to mix the glow in the dark stuff to make it, put the vibrator in and let it dry 2 days. The what was suppose to be a dildo stuck to the impression stuff and was so sticky. It literally could never be used. I would give this a 0 star if I could. Please don’t waste your money. Read more

Verified Buyer

Pros: Don't have any. Cons: Too messy and the powder hardened faster than you could apply it.

Verified Buyer

While everything was provided, the mixtures themself either hardens a lot faster than expressed in the instructions. Then the second mixture wouldn’t mix. Very disappointed.

Verified Buyer

There is no way anyone made one of these by following the directions to a "T" cuz i did & the casting mold hardens as you pour it into the tube. Like any good cook dont follow the temperature part of the instructions or the mixing in a bowl part mix it directly in the tube with 100° water or hotter cuz the casting powder solidifies at 90° and unless you have a titanium wang that sh*t aint going in... to cast a mold. The directions are a scam for you to have to buy more casting powder cuz they dont send enough of it to begin with so if you order this & you're 6" or longer order the casting powder refill with it so you have enough to clone your member Read more

Verified Buyer

Cons: We tried it once and it did not come out right we thought it was faulty. U gave us a second chance and this attempt went worse than the first. the timeframe for completing it is very tight . Ty anyway