Awesome Deals

Post Valentine's Sale - From $5.95

Shop Now

Free Shipping on all Orders of $59 or more!

Clone-A-Willy Kit

Over 100,000 sold!
read reviews Ask A Question
Item #5421
In Stock
$44.95

100% Guarantee

Extra savings when you buy this item and more!

Product Description

Immortalize your boner with this erection-molding kit!

This make your own dildo kit has everything you need to make a soft rubber dildo of your hard penis – with optional vibrations to please her like never before. Just add water to the molding powder, insert your erection into the warm mixture, then slide off the mold and pour in the liquid rubber. You’ll have a highly-detailed replica of your own penis in just a few hours, for DOUBLE the frisky fun! (HINT: Insert the vibe to make your “clone” BUZZ!) Great instructions and 24-hour hotline make it so easy to make your own dildo. Latex-free, hypo-allergenic and safe to use on any penis.

“My boyfriend and I had so much fun with this kit – it’s so easy! We even enjoyed a double penetration with him in my backdoor, and his ‘replica’ in my vagina!”
-Elizabeth P.

 

Product Details

Batteries: 1 AA battery (sold separately)
Brand: Empire Labs, Clone-A-Willy
Colors: Caucasian
Features: Battery Operated, Vibrating, Hypoallergenic
Gender: Male, Female
Material: Rubber
Power Source: Uses Batteries

Customer Reviews

Ask A Question Customer Reviews

Clone-A-Willy Kit reviews verified by reevooReevoo

403 reviews

Reviews from: Sort by:
(6.3 out of 10)
Product features
6.4
Product quality
6.2
Value for money
6.0
Overall Rating
6.3
Scores 6.3 out of 10 based on 403 reviews
Show more score details
(9 out of 10)

Confirmed customer

Happy & having fun
+
Amazingly replicates my exact look!
Too rigid of a silicone. More flexible would be nice.
Confirmed purchase: January 03 2017
Published on: February 15 2017
(1 out of 10)

D

Adventurous and experimental
+
Reviewer left no comment
Mold sets way too fast. Had to order replacement powder kit from their website. Didn't turn out very well, dildo ended up very porous and hard to clean. It was also very firm, a little softer would be more comfortable.
1 of 1 people found this review helpful
Confirmed purchase: December 30 2016
Published on: February 13 2017
(2 out of 10)

MICHAEL

Normal, IL Adventurous and experimental
+
Idea of it is great
Directions are useless because following them just gets the mold to hard before you can even insert your penis
1 of 1 people found this review helpful
Confirmed purchase: January 09 2017
Published on: February 13 2017
(9 out of 10)

DAN

Washington St. Adventurous and experimental
+
There are good products
Price is a bit high
Confirmed purchase: January 12 2017
Published on: February 09 2017
(8 out of 10)

NICHOLAS

Fayetteville, NC Adventurous and experimental
+
It's cool that it makes an exact replica.
I would love to be able to keep the mold afterwards. My wife and I were thinking of making candles with it haha!
1 of 1 people found this review helpful
Confirmed purchase: January 09 2017
Published on: February 07 2017
(1 out of 10)

T

TX Adventurous and experimental
+
Everything
This is terrible. They do not give enough of the molding product to realistically mold the kit. You need 3 people to help with this. A fluffer, someone to mix the mold and then yourself to mold it. I also was disappointed in order to get a refund I have to send back the used kit, which is messy and not really feasible.
Confirmed purchase: December 29 2016
Published on: February 03 2017
(1 out of 10)

RICH

Adventurous and experimental
+
Reviewer left no comment
Did not get it done messed it up
Confirmed purchase: December 29 2016
Published on: February 02 2017
(1 out of 10)

SHANE

Farmington Minnesota Adventurous and experimental
+
Reviewer left no comment
Did not work. We tried to use it and it just spilled out everywhere:(
Confirmed purchase: January 03 2017
Published on: February 01 2017
(4 out of 10)

SHAWNA

Happy & having fun
+
Reviewer left no comment
Difficult to make and with my husbands curve(and very hard silicone) makes it less comfortable to use. Also, my husband has a large girth, so he filled the tube mostly and that made for a thin mold, especially at the top and the dildo was misshapen due to the poured in silicone not being strong enough to push it back into shape.
Confirmed purchase: December 28 2016
Published on: January 31 2017
(2 out of 10)

JEFF

Happy & having fun
+
Reviewer left no comment
Followed instructions intently, needs larger container cylinder. Not enough mix included. Waste of money
1 of 1 people found this review helpful
Confirmed purchase: December 30 2016
Published on: January 30 2017
Something you want To know about the Clone-A-Willy Kit?ask a question

Here's a list of the questions other shoppers have asked owners of the Clone-A-Willy Kit

  1. Monica asked on
    My boyfriend is approx 6.5" width or approx 2.5" in diameter around and a good 11" in length. I've always wanted to make a clone of him because his work takes him out of the country or state so much, will thus even work on him?
    1. CARRIE replied on
      It would be difficult to keep him on the center of the tube and maintain a sufficient amount of molding material around him. It could be done but I would practice first.
  2. Monica asked on
    My boyfriend is approx 6.5" width around and a good 11" in length. I've always wanted to make a clone of him because his work takes him out of the country or state so much, will thus even work on him?
    1. LAURENCE replied on
      I doubt it. He might be to big
    2. MICHAEL replied on
      I think it would be close on length, girth would depend on the diameter (not a measuring tape around the the outside, but a "straight through" or cross-sectional measurement of the thickness). I would think the thickness would work, but hard to say for sure without the diameter measurment.

      You may need more silicon, or a larger vibrator to fill up the mold after it is made.

      There should be more than enough mold material, and a good 11 inch in tube might be able to capture the most of it, though it may shorten it a bit. Width is going to be the major make/break on it, as obviously it won't work if it doesn't fit.

      I would recommend reading this site and making a better choice from there:
      http://cloneawilly.com/pages/sizing-chart

      It might work, but cut a little down on the length (you guys would have to decide if that is acceptable). Also, if he has any curve at all, it would probably be a no go instantly. I have a decent curve and tried to adjust for it, and it still came really close. As large as you say, it might be impossible for the normal kit to work with any curve, but I think they make a kit for curvature.

  3. katherine asked on
    how well would it work with a penis that is curved??
    1. PAYDEN replied on
      It would depend on how curved it is, you have about a 3 inch diameter tube to work with so as long as he would be able to fit all of it in there without touching the sides, it should work well. I'm slightly curved and mine came out really well
  4. Centaur asked on
    Will it work in a strap on?
    1. AUGUST replied on
      I'm not too familiar with strap ons, but I'd imagine yes if you let the silicon over fill the mold you make so it will have a lip at the top so you can use it with the strap on. But keep in mind that the vibrator needs to stick out the end still so you can unscrew it to change the batteries. But you can always leave it out too. Hope I helped. Also, follow the instructions to a tee, just by the way. It's hard to get right.
  5. Lacy asked on
    How big is the molding case?
    1. JESSICA replied on
      Appropriate in length could be slightly wider in diameter to compensate any curvature
  6. Daniel asked on
    How long must you stay hard in the mold?
    1. KEVIN replied on
      It only seemed to take about five min to form up. So I would say five to ten min. It definitely helped having my lady there and made it tons more fun. Lol
  7. Kyana asked on
    Will this fit 11inch?
    1. Ozz replied on
      It's gonna be close.
  8. Samantha asked on
    How long does the man have to hold his erection to make the mold?
    1. BRENDA replied on
      It's all timing! You must have the mold mixture ready as soon as he achieves his erection then it just takes a couple of minutes to insert it into the mixture and your on your way!!!! It's not long at all and then you two can play while the mold sets!!!! Have fun!!!!
About Reevoo
Discreet Shipping, 90-day Returns, 24/7 Customer Service
Price:
item(s) in your cart
Subtotal:
Est. Shipping & Handling:
Est. Order Total: *